MicroSD card does not fit in Freerunner

[Joe Pfeiffer]

Tobias Diedrich writes:
>You wrote:
>> I received my FR today and had trouble fitting the microSD card in place.
>>
>> The problem is that the pins in the FR for the SD card are so high that the
>> flimsy little cover can't snap down over the SD card. I tried it anyway, and
>> put the SIM card in over the SD card to hold it in place.  I booted the
>> device but it never stopped "Registering...". So I removed the SD card and
>> now the SIM card seems to sit correctly in place (making contact on all of
>> its pins) so at least the device works and registers with the network
>> provider (T-Mobile in San Antonio, Texas).
>
>The 'flimsy little cover' does not snap down. It's more a 'holder'
>(or whatever you call somehing like this). You should put the
>microsd into the holder and then put it down (works just the same as
>the sim card holder).

If it's like the GTA01, that holder should lock into place.  It's got
'open' and 'locked' scribed (almost invisibly) on it.  You want it
slid to "open" when you put the card in, close it, slide it to
'locked'.