problem of receiving hangup signal from caller
Erin Yueh
erin_yueh at openmoko.com
Fri Feb 22 04:35:30 CET 2008
Hi,
When modem receives 'NO CARRIER', it means the caller hangup the call.
Cheers,
Erin
YunJung.Cheng wrote:
> Hello,
> i'm a newbie to GSMD.
> i'm writing a program about receiving calls from others, and then do
> some actions when the caller hangup.
> But i cannot find the hangup signal from the caller.
>
> Here is part of my log file, the full log file is attached.
> (get a call from caller, answer phone call, the caller hangup, and i
> make a new call to others)
> ....
> Fri Feb 15 16:13:53 2008 <1> atcmd.c:268:ml_parse() buf=`+CLIP:
> "0287516228",128,,,"compalcom",0'(39)
> Fri Feb 15 16:13:53 2008 <1> atcmd.c:337:ml_parse() extd reply `+CLIP:
> "0287516228",128,,,"compalcom",0' to cmd `NONE', must be unsolicited
> Fri Feb 15 16:13:53 2008 <1> unsolicited.c:70:usock_evt_send() entering
> evt=4
> Fri Feb 15 16:13:53 2008 <1> usock.c:56:usock_cmd_enqueue() enqueueing
> usock cmd 0x806c5b0 for user 0x806c490
> Fri Feb 15 16:13:53 2008 <1> usock.c:1532:gsmd_usock_user_cb()
> successfully sent cmd 0x806c5b0 to user 0x806c490, freeing
> Fri Feb 15 16:13:55 2008 <1> atcmd.c:268:ml_parse() buf=`+CRING: VOICE'(13)
> Fri Feb 15 16:13:55 2008 <1> atcmd.c:337:ml_parse() extd reply `+CRING:
> VOICE' to cmd `NONE', must be unsolicited
> Fri Feb 15 16:13:55 2008 <1> unsolicited.c:70:usock_evt_send() entering
> evt=1
> Fri Feb 15 16:13:55 2008 <1> usock.c:56:usock_cmd_enqueue() enqueueing
> usock cmd 0x806c5b0 for user 0x806c490
> Fri Feb 15 16:13:55 2008 <1> usock.c:1532:gsmd_usock_user_cb()
> successfully sent cmd 0x806c5b0 to user 0x806c490, freeing
> Fri Feb 15 16:13:55 2008 <1> atcmd.c:268:ml_parse() buf=`+CLIP:
> "0287516228",128,,,"compalcom",0'(39)
> Fri Feb 15 16:13:55 2008 <1> atcmd.c:337:ml_parse() extd reply `+CLIP:
> "0287516228",128,,,"compalcom",0' to cmd `NONE', must be unsolicited
> Fri Feb 15 16:13:55 2008 <1> unsolicited.c:70:usock_evt_send() entering
> evt=4
> Fri Feb 15 16:13:55 2008 <1> usock.c:56:usock_cmd_enqueue() enqueueing
> usock cmd 0x806c5b0 for user 0x806c490
> Fri Feb 15 16:13:55 2008 <1> usock.c:1532:gsmd_usock_user_cb()
> successfully sent cmd 0x806c5b0 to user 0x806c490, freeing
> Fri Feb 15 16:14:01 2008 <1> atcmd.c:660:atcmd_submit() submitting
> command `ATA'
> Fri Feb 15 16:14:01 2008 <1> atcmd.c:598:discard_timer() Create discard
> timer
> Fri Feb 15 16:14:01 2008 <1> atcmd.c:268:ml_parse() buf=`OK'(2)
> Fri Feb 15 16:14:01 2008 <1> atcmd.c:640:remove_timer() Get respond
> before timeout, remove timer!
> Fri Feb 15 16:14:01 2008 <1> atcmd.c:230:atcmd_done() Calling final
> cmd->cb()
> Fri Feb 15 16:14:01 2008 <1> usock.c:72:usock_cmd_cb()
> entering(cmd=0x806c5b0, gu=0x806c490)
> Fri Feb 15 16:14:01 2008 <1> usock.c:56:usock_cmd_enqueue() enqueueing
> usock cmd 0x806c610 for user 0x806c490
> Fri Feb 15 16:14:01 2008 <1> atcmd.c:240:atcmd_done() Clearing mlbuf
> Fri Feb 15 16:14:01 2008 <1> usock.c:1532:gsmd_usock_user_cb()
> successfully sent cmd 0x806c610 to user 0x806c490, freeing
> Fri Feb 15 16:14:29 2008 <1> atcmd.c:660:atcmd_submit() submitting
> command `ATD117;'
> Fri Feb 15 16:14:29 2008 <1> atcmd.c:598:discard_timer() Create discard
> timer
> Fri Feb 15 16:14:29 2008 <1> atcmd.c:268:ml_parse() buf=`OK'(2)
> Fri Feb 15 16:14:29 2008 <1> atcmd.c:640:remove_timer() Get respond
> before timeout, remove timer!
> Fri Feb 15 16:14:29 2008 <1> atcmd.c:230:atcmd_done() Calling final
> cmd->cb()
> Fri Feb 15 16:14:29 2008 <1> usock.c:72:usock_cmd_cb()
> entering(cmd=0x806c5b0, gu=0x806c490)
> Fri Feb 15 16:14:29 2008 <1> usock.c:56:usock_cmd_enqueue() enqueueing
> usock cmd 0x806c610 for user 0x806c490
> Fri Feb 15 16:14:29 2008 <1> atcmd.c:240:atcmd_done() Clearing mlbuf
> Fri Feb 15 16:14:29 2008 <1> usock.c:1532:gsmd_usock_user_cb()
> successfully sent cmd 0x806c610 to user 0x806c490, freeing
> Fri Feb 15 16:14:32 2008 <1> atcmd.c:268:ml_parse() buf=`CONNECT'(7)
> Fri Feb 15 16:14:32 2008 <1> atcmd.c:415:ml_parse() NO CARRIER
> Fri Feb 15 16:14:32 2008 <1> atcmd.c:434:ml_parse() Appending buf to mlbuf
> Fri Feb 15 16:14:37 2008 <1> atcmd.c:660:atcmd_submit() submitting
> command `ATH'
> Fri Feb 15 16:14:37 2008 <1> atcmd.c:598:discard_timer() Create discard
> timer
> Fri Feb 15 16:14:38 2008 <1> atcmd.c:268:ml_parse() buf=`OK'(2)
> Fri Feb 15 16:14:38 2008 <1> atcmd.c:640:remove_timer() Get respond
> before timeout, remove timer!
> Fri Feb 15 16:14:38 2008 <1> atcmd.c:230:atcmd_done() Calling final
> cmd->cb()
> Fri Feb 15 16:14:38 2008 <1> usock.c:72:usock_cmd_cb()
> entering(cmd=0x806c5b0, gu=0x806c490)
> Fri Feb 15 16:14:38 2008 <1> usock.c:56:usock_cmd_enqueue() enqueueing
> usock cmd 0x806c568 for user 0x806c490
> Fri Feb 15 16:14:38 2008 <1> atcmd.c:240:atcmd_done() Clearing mlbuf
> Fri Feb 15 16:14:38 2008 <1> usock.c:1532:gsmd_usock_user_cb()
> successfully sent cmd 0x806c568 to user 0x806c490, freeing
>
> Thanks,
> YunJung
More information about the gsmd-devel
mailing list