[gta02-core] last missing symbols

[Rene Harder]

Dave Ball wrote:
> Rene Harder wrote:
>> Well that's the question, as far as I understood the atr0635 comes with
>> the ublox firmware preinstalled. You would only need the other pin
>> functions if  you remove the ublox firmware and write your own. But if
>> you write your own firmware, you'll probably give the pins a different
>> function so you have to redo the symbol anyways.
>>   
>
> My understanding from a quick read of the datasheet was that the
> function of these pins could be set/changed by config of the GPSMODE
> lines, or through s/w initialisation after boot.  It's always possible
> I've miss-understood this of course. :-)

You are right, just checked the manual again. If you for example disable
the GPSMODE pins (P1/GPSMODE0=0), the alternate pin functions gets
activated. You can see this in the optional EEPROM example where the SPI
is used.
So we have to add the other pin names as well, but how do we group the
pins now, firmware function or alternate functions?


I added an update for the most severe mistakes, VCC2 change to E4, NXTO
-> nXTO etc.

Rene
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ATR0635.diff
Type: text/x-patch
Size: 3626 bytes
Desc: not available
Url : http://lists.openmoko.org/pipermail/gta02-core/attachments/20090608/0d9bf889/attachment.bin