Bug #1024 (oscillating re-camping), the story goes on...

[Dieter Spaar]

Hello Al,

Al Johnson wrote:
> Anyone with a debug board can make a simple cable to connect it to the headset 
> port:
>
> Debug board J10 <-> 2.5mm 3-pole jack plug
> 1 (TXD) <-> Tip (RX_IRDA)
> 2 (RXD) <-> Ring (TX_IRDA)
> 9 (GND) <-> Sleeve (Gnd)
>
> modprobe ftdi_sio vendor=0x1457 product=0x5118
>
> The port will appear as /dev/ttyUSB1 if you don't have any other USB serial 
> devices.
>   

Thank you very much for posting this information, I really
appreciate it.

Best regards,
 Dieter