<html><head><style type="text/css"><!-- DIV {margin:0px;} --></style></head><body><div style="font-family:verdana,helvetica,sans-serif;font-size:12pt">Hi,<br>Here is my attempt <a href="http://anyotherkey.googlepages.com/c">http://anyotherkey.googlepages.com/c</a><br><br>AFAIK I made a few mistakes:<br><br>1 I could have used a smaller sized 100uF cap <br><br>2 I could have used thinner wire, I picked up the wrong spool and didn't realise <br><br>3 I shouldn't have tried to open a solder bridge on a 0402 component with a relatively large iron.<br><br>I'm looking into the low volume of my voice on calls, I've only read up briefly on what could be the cause. I can't be certain it wasn't always so low! I am looking through the posts to figure this out from other peoples experiences.<br><br><a rel="nofollow" target="_blank" href="http://www.fsf.org/register_form?referrer=5006"><img src="http://www.geocities.com/aclearn/getButton.png" alt="[FSF Associate
Member]" height="31" width="88"></a><div><br></div></div></body></html>