[PATCH 1/3] NOR Flash Support (kernel + config)
Werner Almesberger
werner at openmoko.org
Thu Dec 27 21:38:38 CET 2007
Andy Green wrote:
> I don't really know why it should not be accepted by MTD_ROM even on
> GTA01
Yep, but the NOR is described in the GTA02-specific machine definition.
So the GTA01 shouldn't even pick it up. And apparently this is exactly
what happens. It's so nice when things work as expected ;-)
So the only compatibility issue that remains is when GTA02 devices get
upgraded to the new kernel. But then, everyone who has a GTA02 should
also have a debug board somewhere _and_ a pretty good idea of what
they're doing.
> -- I tested it with giving the wrong start address in the platform
> stuff on a GTA-02 A4 here and it still had the logical physmap partition
> created.
Perfect. So all GTA02 will look the same.
> On the can't write thing, maybe you might not have the Flash paged in at
> all somehow and are getting a hit on MTD_ROM? Normally I see this in dmesg
Yeah, with the extended command set, I get reasonable blocks.
It's still read-only, though. Gotta check is my hardware combination
is actually set up for this.
My dmesg output is a little chattier:
physmap platform flash device: 00200000 at 18000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0039
Intel/Sharp Extended Query Table at 0x0039
Intel/Sharp Extended Query Table at 0x0039
Intel/Sharp Extended Query Table at 0x0039
Intel/Sharp Extended Query Table at 0x0039
cfi_cmdset_0001: Erase suspend on write enabled
erase region 0: offset=0x0,size=0x2000,blocks=8
erase region 1: offset=0x10000,size=0x10000,blocks=31
physmap-flash.0: 1 set(s) of 1 interleaved chips --> 4 partitions of 512 KiB
Thanks,
- Werner
More information about the openmoko-kernel
mailing list