[PATCH] mach: add QT2410 machine
Ben Dooks
ben at fluff.org
Fri Feb 16 19:46:44 CET 2007
This is a cut-down version of arch/arm/mach-s3c2410/mach-qt2410.c
with the drivers we do not currently have in the kernel removed,
as well as use of the common smdk code to add LED support.
---
To: patches at arm.linux.org.uk
Patch from: Harald Welte <laforge at openmoko.org>
Add support for the Armzone QT2410 system, which is
close to the SMDK2410. This patch also modifies
the common-smdk.c code to not initialise the NAND
platform data as this has been done by mach-qt2410.c
Signed-off-by: Harald Welte <laforge at openmoko.org>
Signed-off-by: Ben Dooks <ben-linux at fluff.org>
diff -urpN -X linux-2.6.20-rmk-16feb2007/Documentation/dontdiff linux-2.6.20-rmk-16feb2007/arch/arm/plat-s3c24xx/common-smdk.c linux-2.6.20-rmk-16feb2007-moko1/arch/arm/plat-s3c24xx/common-smdk.c
--- linux-2.6.20-rmk-16feb2007/arch/arm/plat-s3c24xx/common-smdk.c 2007-02-16 17:18:36.000000000 +0000
+++ linux-2.6.20-rmk-16feb2007-moko1/arch/arm/plat-s3c24xx/common-smdk.c 2007-02-16 18:41:53.000000000 +0000
@@ -30,6 +30,7 @@
#include <asm/mach/irq.h>
#include <asm/hardware.h>
+#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -192,7 +193,8 @@ void __init smdk_machine_init(void)
s3c2410_gpio_setpin(S3C2410_GPF6, 1);
s3c2410_gpio_setpin(S3C2410_GPF7, 1);
- s3c_device_nand.dev.platform_data = &smdk_nand_info;
+ if (!machine_is_qt2410())
+ s3c_device_nand.dev.platform_data = &smdk_nand_info;
platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
diff -urpN -X linux-2.6.20-rmk-16feb2007/Documentation/dontdiff linux-2.6.20-rmk-16feb2007/arch/arm/mach-s3c2410/Kconfig linux-2.6.20-rmk-16feb2007-moko1/arch/arm/mach-s3c2410/Kconfig
--- linux-2.6.20-rmk-16feb2007/arch/arm/mach-s3c2410/Kconfig 2007-02-16 17:18:36.000000000 +0000
+++ linux-2.6.20-rmk-16feb2007-moko1/arch/arm/mach-s3c2410/Kconfig 2007-02-16 18:23:17.000000000 +0000
@@ -103,6 +103,11 @@ config MACH_VR1000
help
Say Y here if you are using the Thorcom VR1000 board.
+config MACH_QT2410
+ bool "QT2410"
+ select CPU_S3C2410
+ help
+ Say Y here if you are using the Armzone QT2410
endmenu
diff -urpN -X linux-2.6.20-rmk-16feb2007/Documentation/dontdiff linux-2.6.20-rmk-16feb2007/arch/arm/mach-s3c2410/Makefile linux-2.6.20-rmk-16feb2007-moko1/arch/arm/mach-s3c2410/Makefile
--- linux-2.6.20-rmk-16feb2007/arch/arm/mach-s3c2410/Makefile 2007-02-16 17:18:36.000000000 +0000
+++ linux-2.6.20-rmk-16feb2007-moko1/arch/arm/mach-s3c2410/Makefile 2007-02-16 18:23:04.000000000 +0000
@@ -28,3 +28,4 @@ obj-$(CONFIG_MACH_OTOM) += mach-otom.o
obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o
obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
+obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o
diff -urpN -X linux-2.6.20-rmk-16feb2007/Documentation/dontdiff linux-2.6.20-rmk-16feb2007/arch/arm/mach-s3c2410/mach-qt2410.c linux-2.6.20-rmk-16feb2007-moko1/arch/arm/mach-s3c2410/mach-qt2410.c
--- linux-2.6.20-rmk-16feb2007/arch/arm/mach-s3c2410/mach-qt2410.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.20-rmk-16feb2007-moko1/arch/arm/mach-s3c2410/mach-qt2410.c 2007-02-16 18:42:12.000000000 +0000
@@ -0,0 +1,453 @@
+/* linux/arch/arm/mach-s3c2410/mach-qt2410.c
+ *
+ * Copyright (C) 2006 by OpenMoko, Inc.
+ * Author: Harald Welte <laforge at openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/mmc/protocol.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/fb.h>
+#include <asm/arch/nand.h>
+#include <asm/arch/udc.h>
+#include <asm/arch/spi.h>
+#include <asm/arch/spi-gpio.h>
+
+#include <asm/plat-s3c24xx/common-smdk.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+
+static struct map_desc qt2410_iodesc[] __initdata = {
+ { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2410_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+/* LCD driver info */
+
+/* Configuration for 640x480 SHARP LQ080V3DG01 */
+static struct s3c2410fb_mach_info qt2410_biglcd_cfg __initdata = {
+ .regs = {
+
+ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT |
+ S3C2410_LCDCON1_CLKVAL(0x01), /* HCLK/4 */
+
+ .lcdcon2 = S3C2410_LCDCON2_VBPD(18) | /* 19 */
+ S3C2410_LCDCON2_LINEVAL(479) |
+ S3C2410_LCDCON2_VFPD(10) | /* 11 */
+ S3C2410_LCDCON2_VSPW(14), /* 15 */
+
+ .lcdcon3 = S3C2410_LCDCON3_HBPD(43) | /* 44 */
+ S3C2410_LCDCON3_HOZVAL(639) | /* 640 */
+ S3C2410_LCDCON3_HFPD(115), /* 116 */
+
+ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
+ S3C2410_LCDCON4_HSPW(95), /* 96 */
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+ },
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+
+ .width = 640,
+ .height = 480,
+
+ .xres = {
+ .min = 640,
+ .max = 640,
+ .defval = 640,
+ },
+
+ .yres = {
+ .min = 480,
+ .max = 480,
+ .defval = 480,
+ },
+
+ .bpp = {
+ .min = 16,
+ .max = 16,
+ .defval = 16,
+ },
+};
+
+/* Configuration for 480x640 toppoly TD028TTEC1 */
+static struct s3c2410fb_mach_info qt2410_prodlcd_cfg __initdata = {
+ .regs = {
+
+ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT |
+ S3C2410_LCDCON1_CLKVAL(0x01), /* HCLK/4 */
+
+ .lcdcon2 = S3C2410_LCDCON2_VBPD(1) | /* 2 */
+ S3C2410_LCDCON2_LINEVAL(639) |/* 640 */
+ S3C2410_LCDCON2_VFPD(3) | /* 4 */
+ S3C2410_LCDCON2_VSPW(1), /* 2 */
+
+ .lcdcon3 = S3C2410_LCDCON3_HBPD(7) | /* 8 */
+ S3C2410_LCDCON3_HOZVAL(479) | /* 479 */
+ S3C2410_LCDCON3_HFPD(23), /* 24 */
+
+ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
+ S3C2410_LCDCON4_HSPW(7), /* 8 */
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+ },
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+
+ .width = 480,
+ .height = 640,
+
+ .xres = {
+ .min = 480,
+ .max = 480,
+ .defval = 480,
+ },
+
+ .yres = {
+ .min = 640,
+ .max = 640,
+ .defval = 640,
+ },
+
+ .bpp = {
+ .min = 16,
+ .max = 16,
+ .defval = 16,
+ },
+};
+
+/* Config for 240x320 LCD */
+static struct s3c2410fb_mach_info qt2410_lcd_cfg __initdata = {
+ .regs = {
+
+ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT |
+ S3C2410_LCDCON1_CLKVAL(0x04),
+
+ .lcdcon2 = S3C2410_LCDCON2_VBPD(1) |
+ S3C2410_LCDCON2_LINEVAL(319) |
+ S3C2410_LCDCON2_VFPD(6) |
+ S3C2410_LCDCON2_VSPW(3),
+
+ .lcdcon3 = S3C2410_LCDCON3_HBPD(12) |
+ S3C2410_LCDCON3_HOZVAL(239) |
+ S3C2410_LCDCON3_HFPD(7),
+
+ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
+ S3C2410_LCDCON4_HSPW(3),
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+ },
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+
+ .width = 240,
+ .height = 320,
+
+ .xres = {
+ .min = 240,
+ .max = 240,
+ .defval = 240,
+ },
+
+ .yres = {
+ .min = 320,
+ .max = 320,
+ .defval = 320,
+ },
+
+ .bpp = {
+ .min = 16,
+ .max = 16,
+ .defval = 16,
+ },
+};
+
+static struct resource cs89x0_resources[] = {
+ [0] = {
+ .start = 0x19000000,
+ .end = 0x19000000 + 16,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EINT9,
+ .end = IRQ_EINT9,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cs89x0_device = {
+ .name = "cirrus-cs89x0",
+ .num_resources = ARRAY_SIZE(cs89x0_resources),
+ .resource = cs89x0_resources,
+};
+
+static struct platform_device *qt2410_devices[] __initdata = {
+ &s3c_device_usb,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c,
+ &s3c_device_iis,
+ &s3c_device_sdi,
+ &s3c_device_usbgadget,
+ &cs89x0_device,
+};
+
+static struct s3c24xx_board qt2410_board __initdata = {
+ .devices = qt2410_devices,
+ .devices_count = ARRAY_SIZE(qt2410_devices)
+};
+
+static struct mtd_partition qt2410_nand_part[] = {
+ [0] = {
+ .name = "U-Boot",
+ .size = 0x30000,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "U-Boot environment",
+ .offset = 0x30000,
+ .size = 0x4000,
+ },
+ [2] = {
+ .name = "kernel",
+ .offset = 0x34000,
+ .size = SZ_2M,
+ },
+ [3] = {
+ .name = "initrd",
+ .offset = 0x234000,
+ .size = SZ_4M,
+ },
+ [4] = {
+ .name = "jffs2",
+ .offset = 0x634000,
+ .size = 0x39cc000,
+ },
+};
+
+static struct s3c2410_nand_set qt2410_nand_sets[] = {
+ [0] = {
+ .name = "NAND",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(qt2410_nand_part),
+ .partitions = qt2410_nand_part,
+ },
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+ */
+
+static struct s3c2410_platform_nand qt2410_nand_info = {
+ .tacls = 20,
+ .twrph0 = 60,
+ .twrph1 = 20,
+ .nr_sets = ARRAY_SIZE(qt2410_nand_sets),
+ .sets = qt2410_nand_sets,
+};
+
+/* SPI */
+static struct spi_board_info qt2410_spi_board_info[] __initdata = {
+ {
+ .modalias = "jbt6k74",
+ /* platform_data */
+ /* controller_data */
+ /* irq */
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 1,
+ /* chip_select */
+ },
+};
+
+static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
+{
+ switch (cs) {
+ case BITBANG_CS_ACTIVE:
+ s3c2410_gpio_setpin(S3C2410_GPB5, 0);
+ break;
+ case BITBANG_CS_INACTIVE:
+ s3c2410_gpio_setpin(S3C2410_GPB5, 1);
+ break;
+ }
+}
+
+static struct s3c2410_spigpio_info spi_gpio_cfg = {
+ .pin_clk = S3C2410_GPG7,
+ .pin_mosi = S3C2410_GPG6,
+ .pin_miso = S3C2410_GPG5,
+ .board_size = ARRAY_SIZE(qt2410_spi_board_info),
+ .board_info = qt2410_spi_board_info,
+ .chip_select = &spi_gpio_cs,
+};
+
+static struct resource s3c_spi_lcm_resource[] = {
+ [0] = {
+ .start = S3C2410_GPB5,
+ .end = S3C2410_GPB5,
+ },
+ [1] = {
+ .start = S3C2410_GPG5,
+ .end = S3C2410_GPG5,
+ },
+ [2] = {
+ .start = S3C2410_GPG6,
+ .end = S3C2410_GPG6,
+ },
+ [3] = {
+ .start = S3C2410_GPG7,
+ .end = S3C2410_GPG7,
+ },
+};
+
+static struct platform_device s3c_device_spi_lcm = {
+ .name = "s3c24xx-spi-gpio",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c_spi_lcm_resource),
+ .resource = s3c_spi_lcm_resource,
+ .dev = {
+ .platform_data = &spi_gpio_cfg,
+ },
+};
+
+static struct s3c2410_udc_mach_info qt2410_udc_cfg = {
+};
+
+static char tft_type = 's';
+
+static int __init qt2410_tft_setup(char *str)
+{
+ tft_type = str[0];
+ return 1;
+}
+
+__setup("tft=", qt2410_tft_setup);
+
+static void __init qt2410_map_io(void)
+{
+ s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
+ s3c24xx_init_clocks(12*1000*1000);
+ s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+ s3c24xx_set_board(&qt2410_board);
+}
+
+static void __init qt2410_machine_init(void)
+{
+ s3c_device_nand.dev.platform_data = &qt2410_nand_info;
+
+ switch (tft_type) {
+ case 'p': /* production */
+ s3c24xx_fb_set_platdata(&qt2410_prodlcd_cfg);
+ break;
+ case 'b': /* big */
+ s3c24xx_fb_set_platdata(&qt2410_biglcd_cfg);
+ break;
+ case 's': /* small */
+ default:
+ s3c24xx_fb_set_platdata(&qt2410_lcd_cfg);
+ break;
+ }
+
+ s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
+
+ s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
+ platform_device_register(&s3c_device_spi_lcm);
+
+ smdk_machine_init();
+}
+
+MACHINE_START(QT2410, "QT2410")
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = qt2410_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = qt2410_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
+
+
More information about the openmoko-kernel
mailing list
