debug board problem
yang.lu at archermind.com
Fri Sep 21 05:07:14 CEST 2007
I want to use usb mass storage. Now I can connect with debug board,
I stop gsmd and modity /etc/inittab
--- S:2:respawn:/sbin/getty 115200 ttySAC0
+++ S:2345:respawn:/sbin/getty 115200 ttySAC0
发件人： Chia-I Wu
发送时间： 2007-09-21 04:20:55
抄送： openmoko-kernel at lists.openmoko.org
主题： Re: debug board problem
On Thu, Sep 20, 2007 at 03:43:06PM +0800, root wrote:
> I want to use debug board, so I insert ftdi_sio module in PC
> (modprobe ftdi_sio vendor=0x1457 product=0x5118).
> Now it can use correctly in u_boot(input/output), it can also print
> kernel messages,
> but can not input after kernel boot.
I guess you want to play with openocd, don't you?
You were connecting to the serial port, where you can issue u-boot
commands while u-boot is running. To work with openocd, you should have
openocd configured and running, then use telnet to connect to it.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the openmoko-kernel