[PATCH 00/15] KBOOT boots NAND kernel

[xiangfu]

matt_hsu wrote:
>    Hi Xianfu,
>
>    What the default openocd config do you use?
>      Matt
now it's work again, i pull off the battery and unplug the usb cable , 
wait a moment .
do it again .and it's work ,this alway happen sometime . but i still can 
not boot my GTA02 with andy's patch.
and i also got no output  from serial console. or something is just a "�"
 
there is the config:
telnet port 4444
gdb_port 3333
interface ft2232
jtag_speed 0
ft2232_vid_pid 0x1457 0x5118
ft2232_layout "jtagkey"
reset_config trst_and_srst
jtag_device 4 0x1 0xf 0xe
daemon_startup attach
target arm920t little reset_run 0 arm920t
working_area 0 0x200000 0x4000 backup
run_and_halt_time 0 5000