[PATCH 00/15] KBOOT boots NAND kernel

[xiangfu]

Andy Green wrote:
> Somebody in the thread at some point said:
>
> | i also use dfu-kboot(write by andy) download kboot to "u-boot" 
> partition.
> | when i start the GTA02 ,it 's AUX LED always blink and screen go to
> | light. it do not boot ,
> | is there something with my GTA02. or which step i am wrong.
if the battery low power , is it may cause this case?
the GTA02 not charge , i always use GTA01 charge the battery ,
so i not sure the battery power.
>
> It's just a panic from Linux (which booted OK then because there is no
> red led flashing code called in kboot)... highly likely you don't have
> ext2 SD Card first partition with rootfs on which will make a panic
> after the drivers are all initialized.
>
> Watch the serial console and you should see the Linux boot and at the
> end say it cannot mount the filesystem or somesuch.  Normal boot now
> looks like this:
>
> Openmoko KBOOT pads.home.warmcat.com andy_f029805ebc877647 Wed Aug 13
> 00:46:24 BST 2008
>
> Checking kernel...
> Openmoko Freerunner Kernel
> Fetching kernel...
> ~ Done
> Running Linux --->
>
>
> Uncompressing
> Linux.......................................................................................................................
> done, booting the kernel.
> [    0.000000] Linux version 2.6.24-andy_f38e788a73434e5e-mokodev
> (agreen at pads.home.warmcat.com) (gcc version 4.1.2) #1025 PREEMPT Sat Aug
> 9 09:25:53 BST 2008
> ...
>
> -Andy
>