booting from NOR (GTA02)

Werner Almesberger werner at
Sat Jan 12 22:41:03 CET 2008

As of r3819, this works now. I still need to make it ignore the
environment (which it fetches from NAND, and which may contain nasty
surprises), but that's less urgent.

However, there's one subtle detail that's quite interesting: we can
check the boot mode (i.e., whether NOR or NAND) by reading the OM[1:0]
bits through the BWSCON register.

As it turns out, BWSCON reflects the _current_ status of OM[1:0],
i.e., after doing a "reset halt" in OpenOCD while holding down AUX,
and then releasing AUX (after all, it's kinda inconvenient to type
when one hand it busy with the GTA02), BWSCON will happily read all

Even better, this also changes whether we see Steppingstone (followed
by zeroes) or NOR at address 0. u-boot copies itself away quickly
enough (and, in fact, we could just jump to the permanently visible
copy of the NOR at 0x18000000 if we're in a great hurry), so this
doesn't cause any real issues.

But it surely made debugging this little feature a lot more exciting
than I expected ... :)

- Werner

More information about the openmoko-kernel mailing list