micro-SD problem on GTA02A5

[Willie Chen]

> That's coming from the ar6k driver. Do you have a wireless module on this
> board ?
>
> Cheers,
> Samuel.
>
>   
Hi Samuel,

I test wireless module on GTA02A5 and log messages as following.

[ 55.045000] Current Request Command:5, ARG:0x00100000 flags: 0x0008
[ 55.060000] CRCFAIL 0x1a3f
[ 55.060000] CRCFAIL 0x1a3f
[ 55.060000] Current Request Command:5, ARG:0x00100000 flags: 0x0008
[ 55.225000] sdio_wlan 00:01: driver attached
[ 55.230000] sdio_wlan 00:01: SDIO device, IDs SD_0001 (active)
[ 56.295000] Unsupported configuration opcode: 3
[ 56.300000] Unsupported configuration opcode: 5
[ 56.305000] ar6000_available
[ 56.315000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1)
[ 56.320000] Block Size Set: 128 (target address:0x8000066C)
[ 56.325000] ar6000_init() Got WMI @ 0xc7d9d200.
[ 56.360000] SDIO_INT_CTRL enable IRQ
[ 56.370000] mac address = 00:12:cf:4a:c2:4a
[ 56.375000] AR6000 Reg Code = 0x40000060
[ 56.385000] ar6000_init() WMI is ready
[ 56.425000] ar6000_avail: name=eth0 htcTarget=0xc7f94000, 
dev=0xc7fa0000 (0), ar=0xc7fa04a0
[ 58.305000] JFFS2 notice: (293) check_node_data: wrong data CRC in data 
node at 0x08d3b65c: read 0x79b050ea, calculated 0xe55c033b.
[ 61.205000] VFS: Mounted root (jffs2 filesystem).

Regards,
Willie
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/openmoko-kernel/attachments/20080124/9ec93396/attachment.htm