some question about serial.c

[xiangfu]

Dennis.Yxun wrote:
> you can follow this
> http://wiki.openmoko.org/wiki/Debug_Board_v3#Serial_Port
>
> use minicom, configure it properly
> setting may like /dev/ttyUSB0, 7N1, 115200? (host and neo must match)
> this could be wrong, correct me!
>
> you may have to dig the s3c2442 data sheet to see
> if the UART is configured correctly (register , clock settings..)
>   
i download the commi but when i make :
iangfu at xiangfu-laptop:~/Software/commi-0.3.2$ make
/usr/bin/uic-qt4 commimainform.ui -o .ui/ui_commimainform.h
uic: File generated with too old version of Qt Designer
File 'commimainform.ui' is not valid
make: *** [.ui/ui_commimainform.h] Error 1
seems the qt version.
so i use:
sudo modprobe ftdi_sio vendor=0x1457 product=0x5118
sudo chown uucp.uucp /dev/ttyUSB0
sudo cu -s 115200 -l /dev/ttyUSB0

but i receive nothing! is that seems the configure of UART  is not star
or the command is not correct?

the code:
http://git.openmoko.org/?p=kboot-stage1.git;a=tree;h=a9dbc635b7047c1532596a38f9741ddb98128578;hb=a9dbc635b7047c1532596a38f9741ddb98128578