[PATCH] add preliminary E-TEN glofiish M800 support

[Harald Welte]

On Wed, Nov 12, 2008 at 11:15:11PM -0200, Werner Almesberger wrote:
 
> I noticed that your identifiers sometimes begin with glofiish_,
> sometimes with m800_. Is this more than coincidence ?

this is more than a coincidence but also less than a good plan.

Most of the glofiish devices, at least the {M,X}{6,7,8}xx seem to be very
similar in their hardware, so I suspect that many of the code is not device
but platform specific.  Sure, the exact camera model and the LCM might vary,
and maybe some GPIO changes.

My plan is to see if I can get the M800 support 'near-complete' (at least gsm,
wifi, bluetooth, charging and the buttons working), then look into X800 (which
is maybe even exactly the same mainboard).

> We've gotten rid of a lot of these ifdefs now. You may want to have
> a look at stable-tracking.

yes, already on my todo list.

-- 
- Harald Welte <laforge at openmoko.org>          	        http://openmoko.org/
============================================================================
Software for the world's first truly open Free Software mobile phone