stable-tracking test image

Werner Almesberger werner at openmoko.org
Tue Nov 18 09:16:43 CET 2008


I wrote:
> The tricky bit is to find out how to inform the ar6k stack that the
> HIF has been disconnected.

That bit seems to work now. I've attached a patch that shows how.
However, it's not quite done yet ...

> After that, there's also the issue of faking card insertion on
> resume, but that should be easy in comparison.

I should have known better than to taunt Murphy. Suspend works great,
but afterwards, s3cmci can't communicate with the AR6k module:

s3c2440-sdi s3c2440-sdi: CMD[ERR -110] #124 op:8 arg:0x000001aa flags:0x082f5 retries:0 Status:nothing to complete

WLAN_RESET is 1, so that side is good. This also happens if I don't
shut down the ar6k WLAN stack, so this is not the stack sending some
particularly vicious command. Maybe we have to go through the full
module reset ritual, or it's s3cmci acting up again. We'll see.

- Werner
-------------- next part --------------
A non-text attachment was scrubbed...
Name: hif-fix-suspend.patch
Type: text/x-diff
Size: 2876 bytes
Desc: not available
Url : http://lists.openmoko.org/pipermail/openmoko-kernel/attachments/20081118/8b6b0e1f/attachment.patch 


More information about the openmoko-kernel mailing list