[GSM upgrade] "Flash operation timeout". Is my GSM module now dead ?? Please help

Cédric DUFOUIL cedric.dufouil at gmail.com
Thu Nov 27 10:55:54 CET 2008


I love you man ! I really love you !

lol

It works exactly how you said.
Thank you very much. I'm gonna ad it to the wiki

Thanks again, you saved my phone !

On Wed, Nov 26, 2008 at 6:32 PM, Stefan Schmidt <stefan at openmoko.org> wrote:
> Hello.
>
> On Wed, 2008-11-26 at 17:57, Cédric DUFOUIL wrote:
>>
>> After loadinf FLUID everything were fine ... I started again the
>> module by typing 's3c24xx-gpio b7=1' as said in the wiki, and it
>> started to flash the firmware. While it was flashing (I could see the
>> progress ...) It failed by a 'Flash operation timeout'error
>>
>> Now, the GSM module seems to not respond anymore :'(
>
> I had the same problem. Please try the following:
>
> Use the following fluid commandline
>  root at om-gta02:/usr/sbin# FLUID_PORT=/dev/ttySAC0 fluid.exe -oO -b 115200
>  -f $HOME/gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-moko10.m0
>
> (Without FLOWCONTROL and with -oo to choose the ROM bootloader)
>
> Then on the second session plese use this instead of the gpio command:
> echo 0 >/sys/bus/platform/devices/neo1973-pm-gsm.0/power_on
> echo 1 >/sys/bus/platform/devices/neo1973-pm-gsm.0/power_on
>
> Download should start now.
>
> Let me know if it worked for you.
>
> regards
> Stefan Schmidt
>
>



More information about the openmoko-kernel mailing list