[Qi] bad magic when booting from NAND

Michael Trimarchi trimarchi at gandalf.sssup.it
Wed Apr 8 08:40:07 CEST 2009

Dmitry Kurochkin wrote:
> I did some more tests.
> When I do build unmodified qi, flash the image, it runs fine.
> But if I insert a single puts() line in src/cpu/s3c2442/start_qi.c :
> start_qi, just after qi info is printed and before
> bootloader_second_phase is called, it hangs and prints Ts.
Two things. You are not in stepping stone size or just you don't have 
what function must use puts. set_putc_func.

More information about the openmoko-kernel mailing list