andy at openmoko.com
Sat Feb 28 20:40:01 CET 2009
-----BEGIN PGP SIGNED MESSAGE-----
Somebody in the thread at some point said:
| On Wed, Feb 25, 2009 at 05:47:28PM +0800, Andy Green wrote:
|> Somebody in the thread at some point said:
|> | Phone will not boot if battery is fully discharged, even if it is
|> plugged in--
|> | https://docs.openmoko.org/trac/ticket/1712
|> This is as fixed as it is going to get. All we can do is work around it
|> by shutting down on low battery, which userspace already does.
| Is it entirely impossible to change the two(?) capacitors on a
| the values of those on a GTA02v6? I can imagine that some users might
| make that fix while the device is open anyway for the buzz fix.
They'd need to pop the main can and fit a tantalum cap in there that
doesn't really fit into a place that doesn't really exist for it.
| Also, as someone suggested on the support list a while ago, how about
| providing a means (e.g. sysfs) of reprogramming the PMU to
| 1) Disable powering on the device on insertion of USB or wall charger.
Unfortunately it was specified very late in the day -- too late -- that
GTA02 should show charging LED state from OFF. The only way to get
close to that with existing hardware is bring up the CPU on insertion.
Even so we didn't make code to keep LED up in suspend that's also needed.
On most rootfs, it will suspend again if you leave it alone, so the
medium-term result is very close to if you remained off.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
-----END PGP SIGNATURE-----
More information about the openmoko-kernel