[PATCH] ASoC: Put LM4853 under DAPM control on GTA02

Mark Brown broonie at opensource.wolfsonmicro.com
Tue Mar 3 11:56:54 CET 2009


Control for the power for the LM4853 on the GTA02 had been made directly
visible to user space, needlessly burning power when no output was being
produced and causing pops and clicks to be worsened due to a lack of
integration with the power sequencing done by DAPM.

Bring the amplifier power under DAPM control, saving power and reducing
the levels of pops and clicks caused.

The existing control is left in place for the benefit of scenario files
but now has no effect.

Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
---
 sound/soc/s3c24xx/neo1973_gta02_wm8753.c |   49 +++++++++++++----------------
 1 files changed, 22 insertions(+), 27 deletions(-)

diff --git a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
index 747f8f0..b76f9e3 100644
--- a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
@@ -5,6 +5,7 @@
  * Author: Graeme Gregory <graeme at openmoko.org>
  * Copyright 2007 Wolfson Microelectronics PLC.
  * Author: Graeme Gregory <linux at wolfsonmicro.com>
+ * Copyright 2009 Wolfson Microelectronics
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -211,6 +212,9 @@ static struct snd_soc_ops neo1973_gta02_voice_ops = {
 
 static u8 lm4853_state=0;
 
+/* This has no effect, it exists only to maintain compatibility with
+ * existing ALSA state files.
+ */
 static int lm4853_set_state(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
@@ -218,10 +222,8 @@ static int lm4853_set_state(struct snd_kcontrol *kcontrol,
 
 	if(val) {
 		lm4853_state |= LM4853_AMP;
-		s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT,0);
 	} else {
 		lm4853_state &= ~LM4853_AMP;
-		s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT,1);
 	}
 
 	return 0;
@@ -245,7 +247,7 @@ static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
 		s3c2410_gpio_setpin(GTA02_GPIO_HP_IN,0);
 	} else {
 		lm4853_state &= ~LM4853_SPK;
-		s3c2410_gpio_setpin(GTA02_GPIO_HP_IN,1);
+		s3c2410_gpio_setpin(GTA02_GPIO_HP_IN,0);
 	}
 
 	return 0;
@@ -259,8 +261,21 @@ static int lm4853_get_spk(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static int lm4853_event(struct snd_soc_dapm_widget *w,
+			struct snd_kcontrol *k,
+			int event)
+{
+	if (SND_SOC_DAPM_EVENT_ON(event))
+		s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT, 0);
+
+	if (SND_SOC_DAPM_EVENT_OFF(event))
+		s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT, 1);
+
+	return 0;
+}
+
 static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
-	SND_SOC_DAPM_LINE("Stereo Out", NULL),
+	SND_SOC_DAPM_SPK("Stereo Out", lm4853_event),
 	SND_SOC_DAPM_LINE("GSM Line Out", NULL),
 	SND_SOC_DAPM_LINE("GSM Line In", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
@@ -307,6 +322,9 @@ static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Handset Mic"),
 	SOC_DAPM_PIN_SWITCH("Handset Spk"),
 
+	/* This has no effect, it exists only to maintain compatibility with
+	 * existing ALSA state files.
+	 */
 	SOC_SINGLE_EXT("Amp State Switch", 6, 0, 1, 0,
 		lm4853_get_state,
 		lm4853_set_state),
@@ -393,32 +411,9 @@ static struct snd_soc_dai_link neo1973_gta02_dai[] = {
 },
 };
 
-#ifdef CONFIG_PM
-static int neo1973_gta02_suspend(struct platform_device *pdev,
-				 pm_message_t state)
-{
-	s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT, 1);
-
-	return 0;
-}
-
-static int neo1973_gta02_resume(struct platform_device *pdev)
-{
-	if(lm4853_state & LM4853_AMP)
-		s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT, 0);
-
-	return 0;
-}
-#else
-#define neo1973_gta02_suspend NULL
-#define neo1973_gta02_resume NULL
-#endif
-
 static struct snd_soc_card neo1973_gta02 = {
 	.name = "neo1973-gta02",
 	.platform = &s3c24xx_soc_platform,
-	.suspend_pre = neo1973_gta02_suspend,
-	.resume_post = neo1973_gta02_resume,
 	.dai_link = neo1973_gta02_dai,
 	.num_links = ARRAY_SIZE(neo1973_gta02_dai),
 };
-- 
1.5.6.3




More information about the openmoko-kernel mailing list