[Qi] bad magic when booting from NAND
Dmitry Kurochkin
dmitry.kurochkin at gmail.com
Sat Mar 7 13:17:02 CET 2009
Hello.
Qi fails to boot from NAND. Qi booting from SD goes fine. Booting NAND
from NOR works as well.
Here is jtag console output:
Qi Bootloader s3c2442 octopus master-hist_3b8513d8b3d9615e
Tue Mar 3 13:06:33 GMT 2009 Copyright (C) 2008 Openmoko, Inc.
Detected: Freerunner / GTA02, A6 PCB
Battery condition reasonable
Trying kernel: SD Card EXT2 P1 Kernel
Card Type: SD 2.0 SDHC / Mfr: 0x03, OEM "SD" / SU08G", rev 8.0 /
s/n: 1882195497 / date: 7/2008
SDHC size: 7790 MiB
Partition: 1 start +16 512-byte blocks, size 7790 MiB
** skipping
Failed to mount ext2 filesystem...
Unable to mount ext2 filesystem
Trying kernel: SD Card EXT2 P2 Kernel
Partition: 2 start +0 512-byte blocks, size 0 MiB
** ext2fs_devread() read outside partition sector 2
Failed to mount ext2 filesystem...
Unable to mount ext2 filesystem
Trying kernel: SD Card EXT2 P3 Kernel
Partition: 3 start +0 512-byte blocks, size 0 MiB
** ext2fs_devread() read outside partition sector 2
Failed to mount ext2 filesystem...
Unable to mount ext2 filesystem
Trying kernel: NAND Kernel
RAW open: +1024 512-byte blocks
Found: "openmoko/2.6.28-oe1+gitr34240a1c"
Size: 1933 KiB
RAW open: +1024 512-byte blocks
Bad kernel header
bad magic 6f6b6f6d
No usable kernel image found
Memory Testing 0x30000000 length 128 MB
Regards,
Dmitry
More information about the openmoko-kernel
mailing list