Increase camera IO drive strength from 2 mA to 8 mA
Werner Almesberger
werner at openmoko.org
Sat Mar 7 16:12:00 CET 2009
The camera driver reduced all IO drivers from their reset defaults of
6 mA to only 2 mA, which caused severe signal distortion at higher
speeds. This patch sets them to 8 mA and also removes apparently
useless repetitions of the setting.
Note that the correct setting of the I2C pullups still needs to be
verified.
Signed-off-by: Werner Almesberger <werner at openmoko.org>
---
Index: cam/drivers/media/video/samsung/4xa_sensor.h
===================================================================
--- cam.orig/drivers/media/video/samsung/4xa_sensor.h 2009-03-07 22:18:38.000000000 +0800
+++ cam/drivers/media/video/samsung/4xa_sensor.h 2009-03-07 22:26:10.000000000 +0800
@@ -223,14 +223,8 @@
{0x62,0x0a}, // Mirror Option
{0xfc,0x02},
- {0x4e,0x00}, // IO current 8mA set
- {0x4e,0x00}, // IO current 8mA set
- {0x4e,0x00}, // IO current 8mA set
- {0x4e,0x00}, // IO current 8mA set
- {0x4f,0x0a}, // 2a IO current 48mA set
- {0x4f,0x0a}, // IO current 48mA set
- {0x4f,0x0a}, // IO current 48mA set
- {0x4f,0x0a}, // IO current 48mA set
+ {0x4e,0x1b}, // Enable SDA and SCL pull-up; drive 8 mA
+ {0x4f,0xf0}, // PCLK and YC: 8 mA, AF and ZM (AZ): 2 mA
{0xfc,0x01},
{0x0c,0x03}, // Full YC Enable
More information about the openmoko-kernel
mailing list