<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=us-ascii" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
<br>
<blockquote cite="mid:20080123100806.GB6370@caravaggio" type="cite">
<pre wrap=""><!---->That's coming from the ar6k driver. Do you have a wireless module on this
board ?
Cheers,
Samuel.
</pre>
</blockquote>
Hi Samuel,<br>
<br>
I test wireless module on GTA02A5 and log messages as following.<br>
<br>
[ 55.045000] Current Request Command:5, ARG:0x00100000 flags: 0x0008<br>
[ 55.060000] CRCFAIL 0x1a3f<br>
[ 55.060000] CRCFAIL 0x1a3f<br>
[ 55.060000] Current Request Command:5, ARG:0x00100000 flags: 0x0008<br>
[ 55.225000] sdio_wlan 00:01: driver attached<br>
[ 55.230000] sdio_wlan 00:01: SDIO device, IDs SD_0001 (active)<br>
[ 56.295000] Unsupported configuration opcode: 3<br>
[ 56.300000] Unsupported configuration opcode: 5<br>
[ 56.305000] ar6000_available<br>
[ 56.315000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1)<br>
[ 56.320000] Block Size Set: 128 (target address:0x8000066C)<br>
[ 56.325000] ar6000_init() Got WMI @ 0xc7d9d200.<br>
[ 56.360000] SDIO_INT_CTRL enable IRQ<br>
[ 56.370000] mac address = 00:12:cf:4a:c2:4a<br>
[ 56.375000] AR6000 Reg Code = 0x40000060<br>
[ 56.385000] ar6000_init() WMI is ready<br>
[ 56.425000] ar6000_avail: name=eth0 htcTarget=0xc7f94000,
dev=0xc7fa0000 (0), ar=0xc7fa04a0<br>
[ 58.305000] JFFS2 notice: (293) check_node_data: wrong data CRC in
data node at 0x08d3b65c: read 0x79b050ea, calculated 0xe55c033b.<br>
[ 61.205000] VFS: Mounted root (jffs2 filesystem).<br>
<br>
Regards,<br>
Willie<br>
</body>
</html>