Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.30 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.04 seconds) done.
PM: Entering mem sleep
Suspending console(s)
sdio_wlan 00:01: suspend
WM8753 I2C Codec 0-001a: suspend
soc-audio soc-audio: suspend
sdio_s3c24xx_hcd 00:00: suspend
mmcblk mmc0:0007: suspend
neo1973-pm-gps neo1973-pm-gps.0: suspend
neo1973-pm-bt neo1973-pm-bt.0: suspend
rtc rtc0: class suspend
pcf50633 0-0073: suspend
pcf50633 0-0073: pcf50633_suspend
hub 1-0:1.0: PM: suspend 2-->2
hub 1-0:1.0: suspend
usb usb1: PM: suspend 2-->2
usb usb1: suspend, may wakeup
lis302dl spi0.1: suspend
lis302dl spi0.0: suspend
jbt6k74 spi2.0: suspend
glamo-mci glamo-mci.0: suspend
glamo-mci glamo-mci.0: faking cmd 7 during suspend
mmc_set_power(power_mode=0, vdd=0
glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.
glamo-spi-gpio glamo-spi-gpio.0: suspend
glamo-fb glamo-fb.0: suspend
platform glamo-mpeg.0: suspend
platform glamo-jpeg.0: suspend
platform glamo-3d.0: suspend
platform glamo-2d.0: suspend
platform bluetooth: suspend
s3c2440-uart s3c2440-uart.2: suspend
s3c2440-uart s3c2440-uart.1: suspend
s3c2440-uart s3c2440-uart.0: suspend
bq27000-battery bq27000-battery.0: suspend
gta02-hdq gta02-hdq.0: suspend
s3c24xx_pwm s3c24xx_pwm.0: suspend
neo1973-resume neo1973-resume.0: suspend
neo1973-memconfig neo1973-memconfig.0: suspend
neo1973-version neo1973-version.0: suspend
sc32440_fiq sc32440_fiq.0: suspend
physmap-flash physmap-flash.0: suspend
s3c2440-ts s3c2440-ts: suspend
s3c2440-nand s3c2440-nand: suspend
s3c2440-usbgadget s3c2440-usbgadget: suspend
gta02_udc_command(2)
platform s3c2410-iis: suspend
s3c2440-i2c s3c2440-i2c: suspend
platform s3c2410-wdt: suspend
s3c2410-ohci s3c2410-ohci: suspend
s3c24xx-sdio s3c24xx-sdio: suspend
gta02-led gta02-led.0: suspend
neo1973-vibrator neo1973-vibrator.0: suspend
pcf50633 pcf50633.0: suspend
neo1973-pm-host neo1973-pm-host.0: suspend
neo1973-pm-gsm neo1973-pm-gsm.0: suspend
suspend_device(): platform_suspend+0x0/0x3c() returns -16
Could not suspend device neo1973-pm-gsm.0: error -16
neo1973-pm-host neo1973-pm-host.0: resuming
pcf50633 pcf50633.0: resuming
neo1973-vibrator neo1973-vibrator.0: resuming
gta02-led gta02-led.0: resuming
s3c24xx-sdio s3c24xx-sdio: resuming
s3c2410-ohci s3c2410-ohci: resuming
platform s3c2410-wdt: resuming
s3c2440-i2c s3c2440-i2c: resuming
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz
platform s3c2410-iis: resuming
s3c2440-usbgadget s3c2440-usbgadget: resuming
gta02_udc_command(1)
s3c2440-nand s3c2440-nand: resuming
s3c2440-nand s3c2440-nand: Tacls=3, 30ns Twrph0=7 70ns, Twrph1=3 30ns
s3c2440-ts s3c2440-ts: resuming
physmap-flash physmap-flash.0: resuming
sc32440_fiq sc32440_fiq.0: resuming
not changing prescaler of PWM 3, since it's shared with timer4 (clock tick)
neo1973-version neo1973-version.0: resuming
neo1973-memconfig neo1973-memconfig.0: resuming
neo1973-resume neo1973-resume.0: resuming
s3c24xx_pwm s3c24xx_pwm.0: resuming
gta02-hdq gta02-hdq.0: resuming
bq27000-battery bq27000-battery.0: resuming
s3c2440-uart s3c2440-uart.0: resuming
s3c2440-uart s3c2440-uart.1: resuming
s3c2440-uart s3c2440-uart.2: resuming
platform bluetooth: resuming
platform glamo-2d.0: resuming
platform glamo-3d.0: resuming
platform glamo-jpeg.0: resuming
platform glamo-mpeg.0: resuming
glamo-fb glamo-fb.0: resuming
glamo-spi-gpio glamo-spi-gpio.0: resuming
glamo-mci glamo-mci.0: resuming
jbt6k74 spi2.0: resuming
lis302dl spi0.0: resuming
lis302dl spi0.1: resuming
usb usb1: resuming
hub 1-0:1.0: resuming
pcf50633 0-0073: resuming
pcf50633 0-0073: pcf irq work already queued
mmc_set_power(power_mode=1, vdd=20
SD power -> 3200mV
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 20) clk: 16666kHz div=2 (req: 16666kHz). Bus width=2
rtc rtc0: class resume
neo1973-pm-bt neo1973-pm-bt.0: resuming
neo1973-pm-gps neo1973-pm-gps.0: resuming
mmcblk mmc0:0007: resuming
sdio_s3c24xx_hcd 00:00: resuming
soc-audio soc-audio: resuming
soc-audio soc-audio: scheduling resume work
WM8753 I2C Codec 0-001a: resuming
sdio_wlan 00:01: resuming
Some devices failed to suspend
PM: Finishing wakeup.
Restarting tasks ... done.
usb0: full speed config #1: 500 mA, Ethernet Gadget, using CDC Ethernet
soc-audio soc-audio: starting resume work
soc-audio soc-audio: resume work completed
JFFS2 notice: (1127) check_node_data: wrong data CRC in data node at 0x0a28c5dc: read 0xa766fee6, calculated 0xc1615797.
modem wakeup interrupt
power_supply bat: driver failed to report `time_to_full_now' property
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Suspending console(s)