Add Samsung S3C camera interface driver.
Original code is from Samsung's BSP and was written for 2.6.21.

Only tested on S3C6410.

Signed-off-by: Werner Almesberger <werner@openmoko.org>

--- 

Index: cam/arch/arm/plat-s3c/dev-camif.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ cam/arch/arm/plat-s3c/dev-camif.c	2009-03-03 19:06:20.000000000 +0800
@@ -0,0 +1,64 @@
+/* linux/arch/arm/plat-s3c/dev-camif.c
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Werner Almesberger <werner@openmoko.org>
+ *
+ * based on dev-hsmmc.c which is
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for camera interface devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+
+#define	S3C6400_PA_CAMIF	0x78000000
+#define S3C24XX_SZ_CAMIF	(0x1000)
+
+
+static struct resource s3c_camif_resource[] = {
+	[0] = {
+		.start = S3C6400_PA_CAMIF,
+		.end   = S3C6400_PA_CAMIF + S3C24XX_SZ_CAMIF - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_CAMIF_C,
+		.end   = IRQ_CAMIF_C,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_CAMIF_P,
+		.end   = IRQ_CAMIF_P,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+static u64 s3c_device_camif_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_camif = {
+	.name		  = "s3c-camif",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_camif_resource),
+	.resource	  = s3c_camif_resource,
+	.dev              = {
+		.dma_mask = &s3c_device_camif_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_camif);
Index: cam/arch/arm/plat-s3c/Kconfig
===================================================================
--- cam.orig/arch/arm/plat-s3c/Kconfig	2009-03-03 16:50:36.000000000 +0800
+++ cam/arch/arm/plat-s3c/Kconfig	2009-03-03 19:06:20.000000000 +0800
@@ -193,4 +193,9 @@
 	help
 	  Compile in platform device definition for framebuffer
 
+config S3C_DEV_CAMIF
+	bool
+	help
+	  Compile in platform device definitions for camera interface code
+
 endif
Index: cam/arch/arm/plat-s3c/Makefile
===================================================================
--- cam.orig/arch/arm/plat-s3c/Makefile	2009-03-03 16:50:36.000000000 +0800
+++ cam/arch/arm/plat-s3c/Makefile	2009-03-03 19:06:20.000000000 +0800
@@ -35,6 +35,7 @@
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
+obj-$(CONFIG_S3C_DEV_CAMIF)	+= dev-camif.o
 
 obj-$(CONFIG_S3C_PWM)		+= pwm.o
 obj-$(CONFIG_S3C_DMA)		+= dma.o

--