MMC power-up handling

[Werner Almesberger]

Hi Harald,

when I saw your change for Bv4 SD/MMC power-up, I thought that we should
also check for a card on mmc_init, so that cards inserted after booting
will be powered. (Of course, doing that with our hardware requires a bit
of acrobatics :-)

In SVN trunk/src/target/u-boot/patches/mmcinit-power-up.patch

And this is where it goes in "series":
| uboot-20061030-neo1973.patch
| 
| # under construction, but intended for mainline
| mmcinit-power-up.patch
| uboot-s3c2410-misccr-definitions.patch

BTW, do you know if the use of the "weak" attribute is acceptable coding
style for u-boot ? If not, I'd have to use yet another #ifdef :-(

Cheers, Werner

-- 
  _________________________________________________________________________
 / Werner Almesberger, Buenos Aires, Argentina     werner at almesberger.net /
/_http://www.almesberger.net/____________________________________________/