qtopia - kernel panic
syed yaqoob ali
yaqoobali007 at gmail.com
Fri Aug 29 07:23:28 CEST 2008
rakshat hooja wrote:
>
>
> On Fri, Aug 29, 2008 at 9:08 AM, syed yaqoob ali
> <yaqoobali007 at gmail.com <mailto:yaqoobali007 at gmail.com>> wrote:
>
> rakshat hooja wrote:
>>
>>
>> On Wed, Aug 27, 2008 at 7:13 PM, arne anka <openmoko at ginguppin.de
>> <mailto:openmoko at ginguppin.de>> wrote:
>>
>> >> I did connect to the cu using this command : cu -l
>> /dev/ttyACM0
>> > But still the same response its going back to the menu
>>
>>
>> Are you not getting the u-boot terminal on the host PC?
>>
>> Rakshat
>> ------------------------------------------------------------------------
> No,I am not getting the u-boot terminal on host pc .I have
> connected the cu and tried to select the option for usb.It is
> returning back th same u-bootmenu on freerunner.
>
>
> What happens on the host computer after you run
>
> cu -l /dev/ttyACM0
>
>
> And did you do sudo chown uucp.uucp /dev/ttyACM0 before running cu?
>
>
> My output is as follows
>
> rakshat at rakshat-laptop:~$ sudo chown uucp.uucp /dev/ttyACM0
> rakshat at rakshat-laptop:~$ sudo cu -l /dev/ttyACM0
> Connected.
> ut: usbtty
> Err: usbtty
> PCB rev: 0x000
> Power: 0mA
>
> switching led 2 0
> switching led 2 1
> switching led 2 0
> GTA02v5 # DEVICE_CONFIGURED: 1
> DEVICE_CONFIGURED: 1
>
> GTA02v5 #
>
>
> works each and every time.
>
> Also in new kernels you no longer need to set console to USB as it is already set by default (atleast in
>
> my experience.
>
> Update me if this works.
>
> Rakshat
>
>
>
>
>
>
>
> _______________________________________________
> support mailing list
> support at lists.openmoko.org <mailto:support at lists.openmoko.org>
> https://lists.openmoko.org/mailman/listinfo/support
>
>
>
>
> --
> --------------
> Please use Firefox as your web browser. Its protects you from spyware
> and is also a very feature rich browser.
> www.firefox.com <http://www.firefox.com>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> support mailing list
> support at lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/support
>
This is what i get when i try connect to u-boot through cu.
1) I connect the usb and start the new freerunner u-boot menu.
2) Then i use this command at host prompt.:
[root at localhost /]# sudo chown uucp.uucp /dev/ttyACM0
[root at localhost /]# sudo cu -l /dev/ttyACM0
Connected.
This is wha ti get on host pc.
I try selecting the console on the usb but it comes back to the same
menu on freerunner.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/support/attachments/20080829/9d11a157/attachment-0003.htm
More information about the support
mailing list