qtopia - kernel panic
syed yaqoob ali
yaqoobali007 at gmail.com
Fri Aug 29 11:12:43 CEST 2008
rakshat hooja wrote:
> Just to clarify - you are following these steps:
>
> 1) Boot Freerunner to Nand
> 2) Connect via USB cable on host
> 3) On host terminal giving the following commands:
>
>
> sudo chown uucp.uucp /dev/ttyACM0
>
> followed by
>
> sudo cu -l /dev/ttyACM0
>
> and you are getting a connected on the host but no U-Boot prompt on
> the host?
>
> Is this correct?
>
> Rakshat
>
>
> On Fri, Aug 29, 2008 at 1:37 PM, rakshat hooja <rakshat at gmail.com
> <mailto:rakshat at gmail.com>> wrote:
>
>
> This is what i get when i try connect to u-boot through cu.
>
> 1) I connect the usb and start the new freerunner u-boot menu.
>
> 2) Then i use this command at host prompt.:
>
> [root at localhost /]# sudo chown uucp.uucp /dev/ttyACM0
> [root at localhost /]# sudo cu -l /dev/ttyACM0
> Connected.t
>
> This is wha ti get on host pc.
>
> I try selecting the console on the usb but it comes back to
> the same menu on freerunner.
>
>
> Console to USB is already default. setting console to USB will
> come back to the same menu. just try pressing enter after the
> connected on the host andd you should get
>
> GTA02v5 # U-Boot prompt.
>
> Rakshat
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> support mailing list
> support at lists.openmoko.org <mailto:support at lists.openmoko.org>
> https://lists.openmoko.org/mailman/listinfo/support
>
>
>
>
> --
> --------------
> Please use Firefox as your web browser. Its protects you from
> spyware and is also a very feature rich browser.
> www.firefox.com <http://www.firefox.com>
>
>
>
>
> --
> --------------
> Please use Firefox as your web browser. Its protects you from spyware
> and is also a very feature rich browser.
> www.firefox.com <http://www.firefox.com>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> support mailing list
> support at lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/support
>
-------------------------------------------------------------------------------------------------------------------------
Just to clarify - you are following these steps:
1) Boot Freerunner to Nand
2) Connect via USB cable on host
3) On host terminal giving the following commands:
sudo chown uucp.uucp /dev/ttyACM0
followed by
sudo cu -l /dev/ttyACM0
and you are getting a connected on the host but no U-Boot prompt on the
host?
--------------------------------------------------------------------------------------------------------------------------
Yes exactly this is what is happening.
I am also pressing enter on the host after getting connected.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/support/attachments/20080829/728aa928/attachment-0001.htm
More information about the support
mailing list