qtopia - kernel panic

[syed yaqoob ali]

rakshat hooja wrote:
> Just to clarify - you are following these steps:
>
> 1) Boot Freerunner to Nand
> 2) Connect via USB cable on host
> 3) On host terminal giving the following commands:
>
>
>           sudo chown uucp.uucp /dev/ttyACM0
>
> followed by
>
>           sudo cu -l /dev/ttyACM0
>
> and you are getting a connected on the host but no  U-Boot prompt on 
> the host?
>
> Is this correct?
>
> Rakshat
>          
>
> On Fri, Aug 29, 2008 at 1:37 PM, rakshat hooja <rakshat at gmail.com 
> <mailto:rakshat at gmail.com>> wrote:
>
>
>         This is what i get when i try connect to u-boot through cu.
>
>         1) I connect the usb and start the new freerunner u-boot  menu.
>
>         2) Then  i use  this command at host prompt.:
>
>         [root at localhost /]# sudo chown uucp.uucp /dev/ttyACM0
>         [root at localhost /]# sudo cu -l /dev/ttyACM0
>         Connected.t
>
>         This is wha ti get on host pc.
>
>         I try selecting the console on the usb but it comes back to
>         the same menu on freerunner.
>
>
>     Console to USB is already default.  setting console to USB will
>     come back to the same menu. just try pressing enter after the
>     connected on the host andd you should get
>
>     GTA02v5 #  U-Boot prompt.
>
>     Rakshat
>
>
>
>
>
>                     
>
>           
>
>
>         _______________________________________________
>         support mailing list
>         support at lists.openmoko.org <mailto:support at lists.openmoko.org>
>         https://lists.openmoko.org/mailman/listinfo/support
>
>
>
>
>     -- 
>     --------------
>     Please use Firefox as your web browser. Its protects you from
>     spyware and is also a very feature rich browser.
>     www.firefox.com <http://www.firefox.com>
>
>
>
>
> -- 
> --------------
> Please use Firefox as your web browser. Its protects you from spyware 
> and is also a very feature rich browser.
> www.firefox.com <http://www.firefox.com>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> support mailing list
> support at lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/support
>   
I was able to access u-boot terminal and changed the environment 
variable mentioned in the website  and saved env variable and i switch 
off the phone .This is the environment i set.

setenv menu_9 Boot from microSD (FAT+ext2): setenv bootargs \${bootargs_base} rootfstype=ext2 root=/dev/mmcblk0p2 rootdelay=5 \${mtdparts} ro\; mmcinit\; fatload mmc 1 0x32000000 \${sd_image_name}\; bootm 0x32000000



Start the neo-freerunner with Nand u-boot menu ,a new entry is displayed 
and i select the new entry  to boot the microsd card .

I get the same kernel panic.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/support/attachments/20080829/5a9556bc/attachment.htm