Success/tips with GPRS usage?

Jim Morris ml at e4net.com
Mon Jul 14 20:22:56 CEST 2008


This is pretty much as far as I get too, and have not found the magic recipe to get any further either.

Timo Jyrinki wrote:
> Hi,
> 
> Any success with GPRS usage, and any possible problem points that were
> resolved by you?
> 
> I've followed example files at both
> http://wiki.openmoko.org/wiki/Manually_using_GPRS and
> known-to-be-working from my previous phone (though via bluetooth to
> laptop, device name changed etc.). gsmd is disabled and I've manually
> disabled/enabled GSM power via
> /sys/devices/platform/neo1973-pm-gsm.0/power_on.
> 
> The best I can get is:
> 
> +++
> OK
> ATZ
> OK
> ATE1
> OK
> AT+CFUN=1
> ERROR
> Connect script failed
> 
> or if using more what I have used before:
> 
> AT
> OK
> ATH
> OK
> ATE1
> OK
> AT+CGDCONT=1,"IP","internet"   # <- the AP there is right
> OK
> ATD*99#
> ERROR
> Connect script failed
> 
> Another symptom is that if I get that far, it's always that every
> other time nothing happens (Connect script failed after some time),
> every other time I get that output.
> 
> Have you experience something similar and found out what's the
> problem? I've fiddled with both gprs peer settings and the
> gprs-connect-chat scripts, adjusting timeouts and everything, but no
> success.
> 
> -Timo
> 
> _______________________________________________
> support mailing list
> support at lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/support
> 


-- 
Jim Morris, http://blog.wolfman.com




More information about the support mailing list