SSH into Freerunner

Colan Lash colanlash at gmail.com
Thu Jul 17 01:57:54 CEST 2008


Hello,

I don't seem to be able to ssh into the FreeRunner.  I did not get the
Neo1973 so this is my first experience with this phone.  Also, I am using
Ubuntu as the GNU/Linux host.

[Note: I was able to ssh in with my Windows Vista machine (following the
instructions on the wiki).  However, I would like to get Ubuntu working,
since I use it as my main computer.]

I run this line:
     ifconfig usb0 192.168.0.200 netmask 255.255.255.0

After, I run ifconfig and see:

desktop:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:11:2f:08:16:c0
          inet addr:192.168.1.103  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::211:2fff:fe08:16c0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:684 errors:0 dropped:0 overruns:0 frame:0
          TX packets:119 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:105645 (103.1 KB)  TX bytes:39554 (38.6 KB)
          Interrupt:16

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1008 (1008.0 B)  TX bytes:1008 (1008.0 B)

usb0      Link encap:Ethernet  HWaddr de:d7:63:45:48:6b
          inet addr:192.168.0.200  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::dcd7:63ff:fe45:486b/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:468 (468.0 B)



Which seems to me, like it should be correct.
However, when I run ssh root at 192.168.0.202 it times out.

I can ping 192.168.0.200 and get a response.
But if I ping 192.168.0.202, I get and "Operation not permitted" error:

desktop:~$ ping -I usb0 192.168.1.202
PING 192.168.1.202 (192.168.1.202) from 192.168.1.103 usb0: 56(84) bytes of
data.
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted

--- 192.168.1.202 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2008ms
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/support/attachments/20080716/67e43cb0/attachment.htm 


More information about the support mailing list