SSH into Freerunner
shawn sullivan
shelbydz at gmail.com
Thu Jul 17 04:20:02 CEST 2008
I've been unable to SSH into my phone. I did:
ifconfig usb0 192.168.1.200 netmask 255.255.255.0
but when I do:
ssh root at 192.168.1.202
it can't find the host. i've tried disabling the firewall; no dice.
Here's my routing table:
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
192.168.0.0 * 255.255.255.0 U 0 0 0
eth0
link-local * 255.255.0.0 U 0 0 0
eth0
default dslmodem.domain 0.0.0.0 UG 0 0 0
eth0
It appears that there is no route to the USB port, but I'm not sure how
to enable that. Can someone help me out? I'm running Ubuntu. I did
verify that the phone is on USB0, but I cannot get any results when I
ping the IP address.
thx
. . .shawn
Colan Lash wrote:
> Thanks to everyone, who responded.
> It turned out, that disabling the firewall fixed the problem.
>
> If anyone is still interested, this is my routing table.
>
> desktop:~$ netstat -r
> Kernel IP routing table
> Destination Gateway Genmask Flags MSS Window irtt Iface
> 192.168.1.0 * 255.255.255.0 U 0 0
> 0 eth0
> 192.168.0.0 * 255.255.255.0 U 0 0
> 0 usb0
> link-local * 255.255.0.0 U 0
> 0 0 eth0
> default 192.168.1.1 0.0.0.0 UG 0 0
> 0 eth0
>
>
> Colan
>
> On Wed, Jul 16, 2008 at 6:14 PM, Stroller
> <stroller at stellar.eclipse.co.uk> wrote:
>> On 17 Jul 2008, at 00:57, Colan Lash wrote:
>>> ...
>>> I can ping 192.168.0.200 and get a response.
>> This is pinging the desktop machine.
>>
>>> But if I ping 192.168.0.202, I get and "Operation not permitted" error:
>>>
>>> desktop:~$ ping -I usb0 192.168.1.202
>>> PING 192.168.1.202 (192.168.1.202) from 192.168.1.103 usb0: 56(84) bytes
>>> of data.
>>> ping: sendmsg: Operation not permitted
>>> ping: sendmsg: Operation not permitted
>>> ping: sendmsg: Operation not permitted
>>>
>>> --- 192.168.1.202 ping statistics ---
>>> 3 packets transmitted, 0 received, 100% packet loss, time 2008ms
>> First two hits indicate firewall:
>> http://www.google.com/search?q=ping:+sendmsg:+Operation+not+permitted
>>
>> Is Shorewall installed on this machine? Can you `/etc/init.d/iptables stop`?
>>
>> I would be grateful if you could post in PLAIN-TEXT to the mailing list. For
>> parts of your message You have chosen a font which is unreadably small on my
>> system. If you post in plain text then _I_ can choose the font size in which
>> I wish to read your message.
>>
>> Stroller.
>>
>>
>>
>
> _______________________________________________
> support mailing list
> support at lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/support
>
More information about the support
mailing list