SSH into Freerunner

Steven ** montgoss+openmokodevice at gmail.com
Thu Jul 17 04:26:37 CEST 2008


Not sure if it makes a difference, but everyone else uses
192.168.0.200 and 192.168.0.202.  You've got a 1 instead of a 0.

-Steven

On Wed, Jul 16, 2008 at 9:20 PM, shawn sullivan <shelbydz at gmail.com> wrote:
> I've been unable to SSH into my phone. I did:
>
> ifconfig usb0 192.168.1.200 netmask 255.255.255.0
>
> but when I do:
> ssh root at 192.168.1.202
>
> it can't find the host. i've tried disabling the firewall; no dice.
> Here's my routing table:
>
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags   MSS Window  irtt
> Iface
> 192.168.0.0     *               255.255.255.0   U         0 0          0
> eth0
> link-local      *               255.255.0.0     U         0 0          0
> eth0
> default         dslmodem.domain 0.0.0.0         UG        0 0          0
> eth0
>
> It appears that there is no route to the USB port, but I'm not sure how
> to enable that. Can someone help me out? I'm running Ubuntu. I did
> verify that the phone is on USB0, but I cannot get any results when I
> ping the IP address.
>
> thx
> . . .shawn
>
> Colan Lash wrote:
>> Thanks to everyone, who responded.
>> It turned out, that disabling the firewall fixed the problem.
>>
>> If anyone is still interested, this is my routing table.
>>
>> desktop:~$ netstat -r
>> Kernel IP routing table
>> Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
>> 192.168.1.0     *                    255.255.255.0   U         0 0
>>              0 eth0
>> 192.168.0.0     *                    255.255.255.0   U         0 0
>>              0 usb0
>> link-local         *                    255.255.0.0      U          0
>> 0                  0 eth0
>> default            192.168.1.1     0.0.0.0             UG       0 0
>>               0 eth0
>>
>>
>> Colan
>>
>> On Wed, Jul 16, 2008 at 6:14 PM, Stroller
>> <stroller at stellar.eclipse.co.uk> wrote:
>>> On 17 Jul 2008, at 00:57, Colan Lash wrote:
>>>> ...
>>>> I can ping 192.168.0.200 and get a response.
>>> This is pinging the desktop machine.
>>>
>>>> But if I ping 192.168.0.202, I get and "Operation not permitted" error:
>>>>
>>>> desktop:~$ ping -I usb0 192.168.1.202
>>>> PING 192.168.1.202 (192.168.1.202) from 192.168.1.103 usb0: 56(84) bytes
>>>> of data.
>>>> ping: sendmsg: Operation not permitted
>>>> ping: sendmsg: Operation not permitted
>>>> ping: sendmsg: Operation not permitted
>>>>
>>>> --- 192.168.1.202 ping statistics ---
>>>> 3 packets transmitted, 0 received, 100% packet loss, time 2008ms
>>> First two hits indicate firewall:
>>> http://www.google.com/search?q=ping:+sendmsg:+Operation+not+permitted
>>>
>>> Is Shorewall installed on this machine? Can you `/etc/init.d/iptables stop`?
>>>
>>> I would be grateful if you could post in PLAIN-TEXT to the mailing list. For
>>> parts of your message You have chosen a font which is unreadably small on my
>>> system. If you post in plain text then _I_ can choose the font size in which
>>> I wish to read your message.
>>>
>>> Stroller.
>>>
>>>
>>>
>>
>> _______________________________________________
>> support mailing list
>> support at lists.openmoko.org
>> https://lists.openmoko.org/mailman/listinfo/support
>>
>
>
> _______________________________________________
> support mailing list
> support at lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/support
>




More information about the support mailing list