How To Factory Reset?

Jim Colton jimcolt at gmail.com
Mon Jul 21 22:26:36 CEST 2008


Go here:

http://www.openmoko.org/wiki/Flashing_the_Neo_FreeRunner



On Mon, Jul 21, 2008 at 12:03 PM, Spent <zach at look.ca> wrote:

>
> Hello ladies and gentlemen,
>
> I got my Freerunner late last week and was initially able to SSH in,
> however
> I  couldn't seem to connect to the internet via USB despite following all
> the instructions.  One of the last things I did the first night before I
> packed it in was try to install the keyboard as the getting started guide
> shows how.  I followed the directions - removed the multi-tap pad, but due
> to dependencies I couldn't install the keyboard.  Now I have no keyboard
> whatsoever and no way to SSH into the device, it just hangs there and
> eventually times out.  I was wondering if there was a way to do a factory
> reset on this, or if I could somehow change any of the files I messed up on
> the neo [possibly etc/network/interfaces]?  without SSH, or if there was a
> factory reset to default image?  Any help is much appreciated.
>
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref    Use
> Iface
> 192.168.1.0     *               255.255.255.0   U     0      0        0
> wlan0
> 192.168.0.0     *               255.255.255.0   U     0      0        0
> usb0
> link-local      *               255.255.0.0     U     1000   0        0
> wlan0
> default         my.router       0.0.0.0         UG    0      0        0
> wlan0
>
>
> There's my routing table if it helps - my router is on 192.168.1.1, not
> sure
> why the usb device is showing as 192.168.0.0
>
> Thanks in advance,
>
> -Zach
> --
> View this message in context:
> http://n2.nabble.com/How-To-Factory-Reset--tp575479p575479.html
> Sent from the Openmoko Support mailing list archive at Nabble.com.
>
>
> _______________________________________________
> support mailing list
> support at lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/support/attachments/20080721/beb4496e/attachment.htm 


More information about the support mailing list