Neo Freerunner stopped booting (not due to the battery)

Najib omenix at gmail.com
Sun Nov 9 19:50:50 CET 2008


I have the same problem too and still doesn't find any solution yet.

Ales Horak wrote:
> Hi everybody,
>
> I have been using Neo Freerunner for 2 months as a daily phone
> with updated 2008.9 without any problems. two days ago my Neo
> stopped booting at the 40% of the splash screen and does not go
> further. if I press the power button for a few seconds, the phone
> turns off, on next booting however it goes only to the 40% and
> thats all.
>
> then I flashed the rootfs with newest FDOM and the kernel with
> Om2008.9-gta02-20080916.uImage.bin and it booted fully. today,
> after about 24 hours, the phone again boots just to the 40%.
>
> the exact behavior is (see the images at
> http://www.fi.muni.cz/~hales/scr.png):
>
>     1. standard booting, 30 seconds pause after 
>
>         pcf50633 0-0073: setting system clock to 2008-11-09 12:48:08 UTC (1226234888)
>
>     2. then it says:
>
>         CRCFAIL 0x1a3f
>         CRCFAIL 0x1a3f
>         CRCFAIL 0x1a3f
>         ...
>         Freeing init memory: 128K
>         PM: Removing info for No Bus:vcs1
>         PM: Removing info for No Bus:vcsa1
>         ...
>
>     3. booting splash appears and goes up to 40%, then stops for
>        about 1-2 minutes
>
>     4. the splash goes away and the following error messages are
>        the last thing displayed:
>
>         Failed to set owner -root- for -/var/run/utmp-.
>         Failed to set mode -0664- for -/var/run/utmp-.
>         Failed to set owner -root- for -/var/run/resolv.conf-.
>         Failed to set mode -0644- for -/var/run/resolv.conf-.
>         Failed to set owner -root- for -/var/run/wtmp-.
>         Failed to set mode -0664- for -/var/run/wtmp-.
>         Failed to set owner -root- for -/var/lock/subsys-.
>         Failed to set mode -0755- for -/var/lock/subsys-.
>         PM: Removing info for No Bus:vcs2
>         PM: Removing info for No Bus:vcsa2
>
>        the only thing that can be done with the phone is to turn
>        it off with the power button.
>
>
> does anyone know what happened to this Neo?       
>
> does anyone know how to repair it?
>
> thanks,
>   




More information about the support mailing list