Trying to make DNS work
bum
tradet.h at gmail.com
Wed Oct 8 13:31:38 CEST 2008
Whoa!
It works! Thanks a lot guys! Really appreciate it! =D
On Wed, Oct 8, 2008 at 1:27 PM, Marc Verwerft <
ml-user+63074-1495606065 at n2.nabble.com<ml-user%2B63074-1495606065 at n2.nabble.com>
> wrote:
> It's a typo.
>
> It should be /etc/init.d not /etc/inti.d
>
> Regards,
>
> Marc
>
> On Wed, Oct 8, 2008 at 1:19 PM, bum <tradet.h at ...<http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306321&i=0>>
> wrote:
>
> >
> > I got the file edited now!
> >
> > But when I do:
> > root at om-gta02:~# /etc/inti.d/networking restart
> > -sh: /etc/inti.d/networking: not found
> >
> > Should I just disconnect and shut down the phone now?
> >
> > On Wed, Oct 8, 2008 at 1:05 PM, David Samblas-3 <
> > ml-user+51344-1875701335 at ...<http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306321&i=1>
> <ml-user%2B51344-1875701335 at ...<http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306321&i=2>>
>
> >> wrote:
> >
> >> If you have a terminal app on the neo do /etc/inti.d/networking start
> >> from it
> >> and the connection will come back
> >> if no terminal app shutdown and restart again
> >>
> >> to edit files trough ssh session or trough the terminal app you can use
> >> vi
> >> #vi /etc/network/interfaces
> >>
> >> then put the cursor on the line you want to began to edit and press "i"
> >> then you can edit the file and can put the "echo nameserver
> >> blablabla..." lines
> >> when done and to save the file
> >>
> >> press esc
> >> and then ":wq"
> >>
> >> /etc/inti.d/networking restart
> >>
> >>
> >>
> >>
> >> El mié, 08-10-2008 a las 03:50 -0700, bum escribió:
> >> > Okay. How shall I put the up echo in the file through neo?
> >> > I log in with ssh then...? Regularly I'd use gedit but now I can't.
> >> >
> >> > I did the echo in the neo then
> >> > /etc/init.d/networking stop
> >> > But then the connection just hung...
> >> >
> >> > On Wed, Oct 8, 2008 at 12:38 PM, David Samblas-3 <
> >> > ml-user+51344-1875701335 at ...<
> http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306274&i=0>
> >> <ml-user%2B51344-1875701335 at ...<
> http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306274&i=1>>
> >>
> >> > > wrote:
> >> >
> >> > > El mié, 08-10-2008 a las 03:05 -0700, bum escribió:
> >> > > > Hello, ubuntu and openmoko newcomer here.
> >> > > >
> >> > > > I can successfully login to my freerunner with ssh and ping (ping
> >> > > > 74.125.19.147) to the outside world but I can't ping to an
> address
> >> (ping
> >> > >
> >> > > > www.google.com).
> >> > > >
> >> > > > I've tried most of the things
> >> > > >
> >> http://wiki.openmoko.org/wiki/USB_Networking#Configure_Default_Neo_DNS here
>
> >>
> >> > >
> >> > > > :
> >> > > > My IP changes so I can't use "echo nameserver 'myIP' >
> >> /etc/resolv.conf".
> >> > >
> >> > > >
> >> > > > echo nameserver 208.67.222.222 > /etc/resolv.conf
> >> > > > echo nameserver 208.67.220.220 >> /etc/resolv.conf
> >> > > > even if I don't understand it, but no luck. Getting error
> >> > > >
> >> > > > "treeman at treeman-PC:~$ sudo echo nameserver 208.67.222.222 >
> >> > > > /etc/resolv.conf
> >> > > > bash: /etc/resolv.conf: Permission denied"
> >> > > >
> >> > > > even with sudo... I dunno...
> >> > > You have to do the echo stuff in the neo not in you pc
> >> > > >
> >> > > > Tried placing
> >> > > > "up echo nameserver 208.67.222.222 > /etc/resolv.conf
> >> > > > up echo nameserver 208.67.220.220 >> /etc/resolv.conf"
> >> > > > in "/etc/network/interfaces" but no luck.
> >> > > this too has to be done in the neo
> >> > > after the interface modification do the following to make it active
> >> > > on the neo:
> >> > > /etc/init.d/networking stop
> >> > > /etc/init.d/networking start
> >> > >
> >> > >
> >> > > >
> >> > > > Proxying from desktop/laptop is the thing I'd want though as I
> have a
> >>
> >> > > laptop
> >> > > > :-D
> >> > > >
> >> > > > Tried dnrd but don't know if I did it right...
> >> > > >
> >> > > > treeman at treeman-PC:~$ sudo gedit /home/treeman/dnrd
> >> > > > [sudo] password for treeman:
> >> > > > (paste http://buildhost.automated.it/gta01 dnrd script )
> >> > > > treeman at treeman-PC:~$ sudo chmod +x /home/treeman/dnrd
> >> > > > treeman at treeman-PC:~$ sudo /home/treeman/dnrd
> >> > > > /home/treeman/dnrd: line 97: -a: command not found
> >> > > >
> >> > > > UDP forwarding link didn't work.
> >> > > >
> >> > > > Iptables:
> >> > > > iptables -t nat -A PREROUTING -p tcp -s 192.168.0.202 -d
> >> 192.168.0.200
> >> > > > --dport domain -j DNAT --to-destination 192.168.0.1
> >> > > > iptables -t nat -A PREROUTING -p udp -s 192.168.0.202 -d
> >> 192.168.0.200
> >> > > > --dport domain -j DNAT --to-destination 192.168.0.1
> >> > > > no errors but didn't work.
> >> > > >
> >> > > > Also edited /etc/network/interfaces and added:
> >> > > > # freerunner
> >> > > > auto usb0
> >> > > > iface usb0 inet static
> >> > > > address 192.168.0.200
> >> > > > netmask 255.255.255.192
> >> > > > post-up /etc/network/freerunner start
> >> > > > pre-down /etc/network/freerunner stop
> >> > > >
> >> > > > and /etc/network/freerunner:
> >> > > > #!/bin/sh
> >> > > > #
> >> > > > # configures the freerunner for internet
> >> > > > #
> >> > > > #
> >> > > >
> >> > > > DEVICE=usb0
> >> > > > IPADDR=192.168.0.200
> >> > > > REMOTE_IPADDR=192.168.0.202
> >> > > > NETMASK=255.255.255.0
> >> > > >
> >> > > > # get first ip for dns
> >> > > > DNSIP=$(cat /etc/resolv.conf | grep nameserver | awk '{ print $2
> }'
> >> |
> >> > > head
> >> > > > -n 1 )
> >> > > >
> >> > > > case "$1" in
> >> > > > start)
> >> > > > iptables -A POSTROUTING -t nat -j MASQUERADE -s
> >> $REMOTE_IPADDR
> >> > > > iptables -A PREROUTING -t nat -p tcp -s $REMOTE_IPADDR -d
> >> $IPADDR
> >> > >
> >> > > > --dport domain -j DNAT --to-destination $DNSIP
> >> > > > iptables -A PREROUTING -t nat -p udp -s $REMOTE_IPADDR -d
> >> $IPADDR
> >> > >
> >> > > > --dport domain -j DNAT --to-destination $DNSIP
> >> > > >
> >> > > > if [ "$(cat /proc/sys/net/ipv4/ip_forward)" = "0" ]; then
> >> > > > echo "temoprarely allow ip_forward for openmoko" >
>
> >> > > > /var/run/openmoko.ip_forward
> >> > > > echo 1 > /proc/sys/net/ipv4/ip_forward
> >> > > > fi
> >> > > > ;;
> >> > > > stop)
> >> > > > iptables -D POSTROUTING -t nat -j MASQUERADE -s
> >> $REMOTE_IPADDR
> >> > > > iptables -D PREROUTING -t nat -p tcp -s $REMOTE_IPADDR -d
> >> $IPADDR
> >> > >
> >> > > > --dport domain -j DNAT --to-destination $DNSIP
> >> > > > iptables -D PREROUTING -t nat -p udp -s $REMOTE_IPADDR -d
> >> > > $IPADDR
> >> > > > --dport domain -j DNAT --to-destination $DNSIP
> >> > > >
> >> > > > if [ -f /var/run/openmoko.ip_forward ]; then
> >> > > > rm /var/run/openmoko.ip_forward
> >> > > > echo 0 > /proc/sys/net/ipv4/ip_forward
> >> > > > fi
> >> > > > ;;
> >> > > > esac
> >> > > >
> >> > > > Made executable with "chmod +x /etc/network/freerunner".
> >> > > >
> >> > > > Also edited the ubuntu bug thing:
> >> > > > "One can patch /etc/udev/rules.d/85-ifupdown.rules. Moving the
> >> > > DRIVERS=="*?"
> >> > > > out of the top GOTO, to ACTION=="add" line fixes the problem."
> >> > > >
> >> > > > Well there we go, I'm out of ideas and I've tried these steps more
>
> >> than
> >> > > > once. I've rebooted and stuff and now I'm hoping for your help!
> >> > > >
> >> > > > Regards, bum
> >> > >
> >> > >
> >> > > _______________________________________________
> >> > > support mailing list
> >> > > support at ...<
> >> http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306232&i=0>
> >> > > https://lists.openmoko.org/mailman/listinfo/support
> >> > >
> >> > >
> >> > > ------------------------------
> >> > > View message @
> >> > > http://n2.nabble.com/Trying-to-make-DNS-work-tp1306198p1306232.html
> >> > > To unsubscribe from Trying to make DNS work, click here< (link
> removed)
> >> =>.
> >> > >
> >> > >
> >> > >
> >> >
> >>
> >>
> >> _______________________________________________
> >> support mailing list
> >> support at ...<
> http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306274&i=2>
> >> https://lists.openmoko.org/mailman/listinfo/support
> >>
> >>
> >> ------------------------------
> >> View message @
> >> http://n2.nabble.com/Trying-to-make-DNS-work-tp1306198p1306274.html
> >> To unsubscribe from Trying to make DNS work, click here< (link removed)
> =>.
> >>
> >>
> >>
> >
> > --
> > View this message in context:
> http://n2.nabble.com/Trying-to-make-DNS-work-tp1306198p1306298.html
> > Sent from the Openmoko Support mailing list archive at Nabble.com.
> >
> >
> > _______________________________________________
> > support mailing list
> > support at ...<http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306321&i=3>
> > https://lists.openmoko.org/mailman/listinfo/support
> >
>
> _______________________________________________
> support mailing list
> support at ...<http://n2.nabble.com/user/SendEmail.jtp?type=node&node=1306321&i=4>
> https://lists.openmoko.org/mailman/listinfo/support
>
>
> ------------------------------
> View message @
> http://n2.nabble.com/Trying-to-make-DNS-work-tp1306198p1306321.html
> To unsubscribe from Trying to make DNS work, click here< (link removed) =>.
>
>
>
--
View this message in context: http://n2.nabble.com/Trying-to-make-DNS-work-tp1306198p1306330.html
Sent from the Openmoko Support mailing list archive at Nabble.com.
More information about the support
mailing list
