[Qt Extended] Wifi works, but no DNS
Jette Derriche
jette at nerdgirl.dk
Wed Oct 29 00:26:46 CET 2008
Of cause... 5 minutes after I sent the below mail, it started working...
Now I need to figure out what I've done right :-)
/Jette
On Wed, 2008-10-29 at 00:19 +0100, Jette Derriche wrote:
> On Tue, 2008-10-28 at 19:37 +0100, Jette Derriche wrote:
> > I have configured Wireless LAN, and it seems to work. At least it says
> > "Online" under Settings -> Internet. But initially it says "pending..."
> > and then after a while it says "offline". I go into "properties" and
> > select "Wireless Encryption". I don't change anything.. then press
> > "back", and then it says "Online"...
>
> Clearly something is not right:
>
> ~# route -n
> Kernel IP routing table
> Destination Gateway Genmask Flags Iface
> 192.168.0.0 0.0.0.0 255.255.255.0 U usb0
> 169.254.0.0 0.0.0.0 255.255.0.0 U eth0
> 0.0.0.0 192.168.0.200 0.0.0.0 UG usb0
>
> (I removed the Metric, Ref and Use columns, since they are all zero)
>
> Apparently the GUI adds double quotes to the key...
>
> ----------------------------------------------------------
> # ifup eth0
> sed: unrecognized option `--quiet'
> BusyBox v1.11.1 (2008-08-05 02:00:09 CEST) multi-call binary
>
> Usage: sed [-efinr] pattern [files...]
>
> WPA: Configuring Interface
> Line 9: Too long WEP key 0 '"3a9b7xxxxxxxxxxxxxxefad62a'.
> Line 9: failed to parse wep_key0 '"3a9b7xxxxxxxxxxxxxxefad62a'.
> Line 11: failed to parse network block.
> Failed to read or parse configuration
> '/etc/wpa_supplicant/wpa_supplicant.conf'.
> wpa_supplicant: /usr/sbin/wpa_supplicant daemon failed to start
> ----------------------------------------------------------
>
> The error disappeared when I removed the quotes around the key in
> wpa_supplicant.conf ...
>
> This is a bit frustrating:
>
> ----------------------------------------------------------
> root at om-gta02:~# ifup eth0
> ifup: interface eth0 already configured
> root at om-gta02:~# ifdown eth0
> cat: can't open '/var/run/udhcpc.eth0.pid': No such file or directory
> root at om-gta02:~# touch /var/run/udhcpc.eth0.pid
> root at om-gta02:~# ifdown eth0
> ifdown: interface eth0 not configured
> ----------------------------------------------------------
>
> But aside from that, now I get this:
>
> ----------------------------------------------------------
> root at om-gta02:~# ifup eth0
> sed: unrecognized option `--quiet'
> BusyBox v1.11.1 (2008-08-05 02:00:09 CEST) multi-call binary
>
> Usage: sed [-efinr] pattern [files...]
>
> WPA: Configuring Interface
> Failed to connect to wpa_supplicant - wpa_ctrl_open: Connection refused
> ioctl[SIOCSIWENCODEEXT]: Operation not supported
> ioctl[SIOCSIWENCODEEXT]: Operation not supported
> ioctl[SIOCSIWENCODEEXT]: Operation not supported
> ioctl[SIOCSIWENCODEEXT]: Operation not supported
> udhcpc (v1.11.1) started
> Sending discover...
> Sending discover...
> Sending discover...
> No lease, failing
> ----------------------------------------------------------
>
> My config files:
>
> ----------------------------------------------------------
> # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
>
> # The loopback interface
> auto lo
> iface lo inet loopback
>
> # Wireless interfaces
> iface wlan0 inet dhcp
> wireless_mode managed
> wireless_essid any
> iface atml0 inet dhcp
>
> # Wired or wireless interfaces
> iface eth0 inet dhcp
> wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
>
> iface eth1 inet dhcp
>
> # Ethernet/RNDIS gadget (g_ether)
> # ... or on host side, usbnet and random hwaddr
> auto usb0
> iface usb0 inet static
> address 192.168.0.202
> netmask 255.255.255.0
> network 192.168.0.0
> gateway 192.168.0.200
>
> # Bluetooth networking
> iface bnep0 inet dhcp
> -----------------------------------------------------------
>
> -----------------------------------------------------------
> ctrl_interface=/var/lib/wpa_supplicant
> ctrl_interface_group=0
> eapol_version=1
> fast_reauth=1
> ap_scan=1
> network={
> ssid="OMNIX"
> wep_key0=3a9b7xxxxxxxxxxxxxxefad62a
> key_mgmt=NONE
> }
> -----------------------------------------------------------
>
> I have also tried iwconfig with no luck....
> Adding the IP of my router or openDNS nameservers to resolv.conf, does
> not help either...
>
> Any ideas?
>
> /Jette
>
>
> _______________________________________________
> support mailing list
> support at lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/support
More information about the support
mailing list