using openocd

[Kees Jongenburger]

On Mon, Sep 1, 2008 at 6:33 AM, Lynn Nguyen <lynn.mesl at gmail.com> wrote:
> Hey All,
>
> I was wondering if anyone was using the Neo1973 (GTA01v4) with Debug board
> v3. I used the openocd.cfg available on the wiki and I get this problem:
> Info:    openocd.c:82 main(): Open On-Chip Debugger (2006-08-01 12:00 CEST)
> Info:    configuration.c:50 configuration_output_handler(): Command
> ft2232_device_desc not found
> Info:    configuration.c:50 configuration_output_handler(): Command
> ft2232_layout not found
> Info:    configuration.c:50 configuration_output_handler(): Command
> ft2232_vid_pid not found
> Error:   jtag.c:1219 jtag_init(): No valid jtag interface found (ft2232)
>
> It seems like openocd is having some trouble with ft2232 because I don't see
> anything wrong with those commands.

yes , perhaps libft2232 is not enabled in you openocd build?


greetings