micro sh

[Seth Rothenberg]

I bought a 4gb SDHC card, and it is not recognized.
I thought I read on this list that it is supported.
Is there something I need to do before fdisk?
output below.

Thanks
Seth

root at om-gta02:~# fdisk /dev/mmcblk0
fdisk: cannot read from /dev/mmcblk0
root at om-gta02:~#
root at om-gta02:~# uname -a
Linux om-gta02 2.6.24 #1 PREEMPT Thu Nov 6 02:57:37 CST 2008 armv4tl unknown
root at om-gta02:~# dmesg | grep mmcbl             (duplicate lines trimmed)
[   38.775000] mmcblk0: error -110 sending read/write command
[   38.780000] end_request: I/O error, dev mmcblk0, sector 0
[   38.780000] Buffer I/O error on device mmcblk0, logical block 0
[   38.845000] mmcblk0: error -84 sending read/write command
[   38.850000] end_request: I/O error, dev mmcblk0, sector 0
[   38.850000] Buffer I/O error on device mmcblk0, logical block 0
[ 2702.900000] mmcblk0: error -110 sending read/write command
[ 2702.905000] end_request: I/O error, dev mmcblk0, sector 0
[ 2702.905000] Buffer I/O error on device mmcblk0, logical block 0
root at om-gta02:~#

root at om-gta02:~# modprobe s3cmci
modprobe: module s3cmci not found
modprobe: failed to load module s3cmci


"This has been fixed in commits 2831 (for 2.6.21.x) and 2832 (for 2.6.22.x)."