neil.benn at ziath.com
Sun Jan 11 15:56:33 CET 2009
> If you want to minimally modify the package
> 'linux-image-2.6.24-openmoko-gta02' I suggest the following:
> 1) apt-get source linux-image-2.6.24-openmoko-gta02
> 2) modify linux-2.6-openmoko-20081103.git7172ec57/defconfig-gta02 by hand
> or with menuconfig
> 3) sudo apt-get build-dep linux-image-2.6.24-openmoko-gta02
> 4) fakeroot apt-get --build source linux-image-2.6.24-openmoko-gta02
> 5) sudo dpkg -i linux-image-2.6.24-openmoko-gta02*.deb
Thanks for that - I'm working on compiling the base install before
I start to mess with the config file. I've followed the instructions but
when I try to execute the command on line 4 (the build command), I get the
cc1: error: unrecognized command line option "-mlittle-endian"
cc1: error: unrecognized command line option "-mapcs"
cc1: error: unrecognized command line option "-mno-sched-prolog"
cc1: error: unrecognized command line option "-mabi=aapcs-linux"
cc1: error: unrecognized command line option "-mno-thumb-interwork"
arch/arm/kernel/asm-offsets.c:1: error: bad value (armv4t) for -march=
arch/arm/kernel/asm-offsets.c:1: error: bad value (arm9tdmi) for -mtune=
make: *** [arch/arm/kernel/asm-offsets.s] Error 1
make: *** [prepare0] Error 2
make: Leaving directory
make: *** [build-stamp] Error 2
dpkg-buildpackage: failure: debian/rules build gave error exit status 2
Build command 'cd linux-2.6-openmoko-20081103.git7172ec57 &&
dpkg-buildpackage -b -uc' failed.
E: Child process failed
Looking around, the comment I can find is that does teh asm-asm in include
point to asm (it does) - apart from that I'm stuck. Compiling on Ubunutu
8.10 if that maeks any difference?
Neil Benn Msc
Website - http://www.ziath.com
Blog - http://www.labauto-lounge.com
IMPORTANT NOTICE: This message, including any attached documents, is
intended only for the use of the individual or entity to which it is
addressed, and may contain information that is privileged, confidential and
exempt from disclosure under applicable law. If the reader of this message
is not the intended recipient, or the employee or agent responsible for
delivering the message to the intended recipient, you are hereby notified
that any dissemination, distribution or copying of this communication is
strictly prohibited. If you have received this communication in error,
please notify Ziath Ltd immediately by email at info at ziath.com. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the support