GTA01 - Can't boot from SD
Juan Cañete
jcazor.listas at gmail.com
Sun Jan 18 06:16:06 CET 2009
Hi,
I've installed Qi on a GTA01 and I can't boot from SD. The SD card has two ext2 partitions, the first one has the following files:
root at om-gta01:/# ls -ltrR
.:
drwx------ 2 root root 12288 Dec 17 01:09 lost+found
-rw-r--r-- 1 root root 140 Dec 17 02:13 version
-rw-r--r-- 1 root root 1912564 Dec 17 02:13 uImage.bin
drwxr-xr-x 2 root root 1024 Dec 17 02:27 boot
./lost+found:
./boot:
lrwxrwxrwx 1 root root 13 Dec 17 02:27 uImage-GTA01.bin -> ../uImage.bin
-rw-r--r-- 1 root root 44 Dec 17 02:27 append-GTA01
The append-GTA01 file contains the line:
root=/dev/mmcblk0p2 console=tty0 loglevel=8
On boot I can't see any log message, I only see:
s3c2410_udc: debugfs dir creation failed -19
Please wait: booting...
And the Neo boots from flash. It's like the SD is not detected, but then, when the Neo boots, its detected ok on boot:
mmc_set_power(power_mode=2, vdd=20)
s3c2410-sdi s3c2410-sdi: running at 16625kHz (requested: 25000kHz).
mmc0: new SDHC card at address b368
mmcblk0: mmc0:b368 NCard 3905536KiB
mmcblk0: p1 p2
JFFS2 notice: (968) check_node_data: wrong data CRC in data node at 0x03ce120c: read 0x688bb22f, calculated 0x53577bf2.
GSM wakeup interrupt (IRQ 17)
I tried booting from SD with uboot instead of Qi, and with only one partition on SD, with the same results.
Qi version is: qi-s3c2410-master_a2d11c4dd18c9517.udfu
Anybody knows what the problem is?
best regards.
--
Juan Cañete Azorín
hiroshima 45, Tchernobyl 86, Windows 95 ...
Powered by Linux
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 197 bytes
Desc: not available
Url : http://lists.openmoko.org/pipermail/support/attachments/20090118/6e093626/attachment.pgp
More information about the support
mailing list