Can't create bug ticket
daniel at digsoc.com
Mon Jan 26 14:23:41 CET 2009
I think I accidentally replied to you directly. I'm going to post
again to the list, so please forgive if you get my e-mail twice.
On Sun, Jan 25, 2009 at 11:19 PM, William Kenworthy (via Nabble)
<ml-user+1677-643196188 at n2.nabble.com> wrote:
> This is interesting - you have similar uart settings to mine!
> Some things that might be useful:
> minicom, set to 115200,8,n,1 hardware flow control
> Stop X
> stty -F /dev/ttySAC0 sane
> stty -F /dev/ttySAC0
> (the above is one line - sets the uart)
> Once you are happy the uart is talking ok, try restarting X and see what
> What I have been looking at so far is that my uart isnt being
> initialised properly by some software (such as the mux)
> And its already obvious to me that at least two variants of uart configs
> exist (see bug #2215 for the one that works with the mux)
> Hint: be nice if others could check and see what their uart shows if
> they are having connection problems :)
> On Sun, 2009-01-25 at 20:04 -0800, danek wrote:
>> I don't have /dev/ttSAC0 ... I'm going to assume ttySAC0 is the same
>> Below I have the output from 2007.2/2008.4, since it's the most recent
>> I flashed (to try using GSM manually)
>> If you think another distribution would give different output that would
>> more useful for your purposes, let me know.
>> My modem did work with FSO (I used milestone 3 briefly, and milestone 4
>> a little bit longer) when it worked. I never got a chance to try SHR while
>> it was working. I never tried debugging my modem while it was working, so
>> don't know what parts of its behavior are normal and what parts are new.
>> root at om-gta02:~# stty -a -F /dev/tty
>> /dev/tty /dev/tty1 /dev/tty3 /dev/ttySAC0 /dev/ttySAC2
>> /dev/tty0 /dev/tty2 /dev/tty4 /dev/ttySAC1
>> root at om-gta02:~# stty -a -F /dev/ttySAC0
>> speed 115200 baud; rows 24; columns 80;
>> intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
>> eol2 = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W;
>> lnext = ^V; flush = ^O; min = 1; time = 0;
>> -parenb -parodd cs8 -hupcl -cstopb cread clocal crtscts
>> -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon
>> -ixoff -iuclc -ixany -imaxbel
>> -opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0
>> -isig -icanon -iexten -echo echoe echok -echonl -noflsh -xcase -tostop
>> echoctl echoke
>> root at om-gta02:~# stty -g -F /dev/ttySAC0
>> William Kenworthy wrote:
>> > I would appreciate it if you could send me the results of:
>> > stty -a -F /dev/ttSAC0
>> > stty -g -F /dev/ttSAC0
>> > Gives me some more data for my problem
>> > Tks,
>> > BillK
> William Kenworthy <billk at ...>
> Home in Perth!
> support mailing list
> support at ...
> This email is a reply to your post @
> You can reply by email or by visting the link above.
View this message in context: http://n2.nabble.com/Still-can%27t-register-GSM-tp1649863p2217836.html
Sent from the Openmoko Support mailing list archive at Nabble.com.
More information about the support