"No space left on device"

[Paul]

I would also check to see if you are using u-boot or qi.  I think u-boot
only support partitions of certain sizes.

On Tue, Jun 9, 2009 at 10:01 AM, arne anka <openmoko at ginguppin.de> wrote:

> > - to bood from the SD in QT, but it is failing also (trying to mount
> > /var/something.... ) and stops
>
> you could mount the sd card in your pc and modify the fstab of qt, to
> mount only from sd.
> besides that, i would have expected it to mount /var ... to tmpfs, not
> nand (or any physical storage at all).
>
> for a minimal system, using the sd card image created to flash the
> firmware could help -- i think, it starts sshd, too.
> if you didn't flash the newer calypso firmware, it could be done now, and
> if you flashed already, it doesn't harm.
> if you don't like it, you could remove the startup script from (probably)
> /et/init.d/ and boot from the sd card then.
>
> _______________________________________________
> support mailing list
> support at lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/support
>



-- 
Paul
Email - paultsai at gmail.com

There were moments when he looked on evil simply as a mode through which he
could realize his conception of the beautiful.
Oscar Wilde - The Picture of Dorian Gray
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/support/attachments/20090609/fead6dc7/attachment.htm