Om2009 testing Release 2

[halbtaxabo-om at yahoo.com]

-- On Thu, 5/7/09, Angus Ainslie <nytowl at openmoko.org> wrote:

> On Thu, 2009-05-07 at 01:47 -0700, halbtaxabo-om at yahoo.com
> wrote:
> > Did that, then in the settings menu, chose 'phone', and 
> > set the 'message-volume' to 100 which seems to be the max.
> > I assume this is the setting for the loudness of incoming
> > calls. But, incoming calls are still so quiet as to be
> > just barely audible in a quiet environment.
> > 
> 
> message-volume is the loudness of the sms alert tone.

Aha! So I was setting the wrong parameter.

> In the current version there are some situations were the
> modem volume
> gets reset during call setup and might need adjusting (
> fixing ) during
> the call. Use the AUX button to try and adjust it during
> the call. This
> should be fixed in the next release.

The effect of pressing the AUX button after a call started
was indeed to change the volume somewhat, but it had the
unfortunate side effect that the device became unresponsive
to all commands including "End Call". Fortunately, I was
only calling the 0800 number that tells me how much credit
I have left on my prepaid sim card ... so no charge ...
but this isn't a workaround. Any prediction on when the
next release might be?

Nick