SHR enlightenment crash

[Carsten Haitzler (The Rasterman)]

On Sun, 01 Nov 2009 18:05:37 +0100 Matthias Huber
<matthias.huber at wollishausen.de> said:

>  01.11.2009 17:38,   Seth Rothenberg :
> > On Sun, Nov 1, 2009 at 10:58 AM, Matthias Huber
> > <matthias.huber at wollishausen.de> wrote:
> >   
> >> /etc/init.d/xserver-nodm restart
> >>     
> >
> >   
> dmesg is not the place where enlightenment logs,
> it is /tmp/x.log

not useful. apps are not kernels or daemons. they dont go logging before they
crash. that white box you see *IS* the log. well.. it's the "i've crashed. and
you now have the opportunity to find out why, before you abort or continue" by
using gdb. use gdb to attach to enlightenment's PID:

gdb enlightenment PID

(where PID is the process id of the enlightenment process), and you can do
backtraces, print out variables etc. etc. this of course requires you at the
least have e + it's libs compiled with gdb debugging. without that you wont get
anything useful. :)

we even have a whole wiki page on it:

http://trac.enlightenment.org/e/wiki/Debugging

> > Thanks.   I got the same message
> > Enlightenment SIGABRT'd.
> >
> > dmesg output may help (below).
> >
> > I did not mention....  SHR unstable, has been working for a long time,
> > did not update until this problem came up, then did update/upgrade today.
> >
> >
> > Thanks
> > Seth
> >
> >
> > list(head=c038a75c)
> > [21474537.330000] s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000
> > (irq = 76) is a S3C2440
> > [21474537.415000] brd: module loaded
> > [21474537.415000] neo1973-version neo1973-version.0: starting
> > [21474537.440000] physmap platform flash device: 00200000 at 18000000
> > [21474537.440000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
> > [21474537.440000]  Intel/Sharp Extended Query Table at 0x0039
> > [21474537.440000]  Intel/Sharp Extended Query Table at 0x0039
> > [21474537.440000]  Intel/Sharp Extended Query Table at 0x0039
> > [21474537.440000]  Intel/Sharp Extended Query Table at 0x0039
> > [21474537.440000]  Intel/Sharp Extended Query Table at 0x0039
> > [21474537.440000] cfi_cmdset_0001: Erase suspend on write enabled
> > [21474537.440000] erase region 0: offset=0x0,size=0x2000,blocks=8
> > [21474537.440000] erase region 1: offset=0x10000,size=0x10000,blocks=31
> > [21474537.440000] physmap-flash.0: 1 set(s) of 1 interleaved chips -->
> > 4 partitions of 512 KiB
> > [21474537.445000] RedBoot partition parsing not available
> > [21474537.455000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics
> > [21474537.460000] s3c2410_nand_probe(c0372970)
> > [21474537.460000] s3c2440-nand s3c2440-nand: mapped registers at c8a00000
> > [21474537.460000] result 1 from 100000, 0
> > [21474537.460000] result 3 from 100000, 25
> > [21474537.460000] result 2 from 100000, 15
> > [21474537.460000] s3c2440-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3
> > 30ns, Twrph1=2 20ns
> > [21474537.460000] s3c2440-nand s3c2440-nand: NF_CONF is 0xf618
> > [21474537.460000] initialising set 0 (c7994000, info c79a7ec0)
> > [21474537.460000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa
> > (Samsung NAND 256MiB 1,8V 8-bit)
> > [21474537.460000] s3c2440-nand s3c2440-nand: chip c79940d0 => page shift 11
> > [21474537.460000] Bad block table found at page 131008, version 0x01
> > [21474537.460000] Bad block table found at page 130944, version 0x01
> > [21474537.460000] nand_read_bbt: Bad block at 0x000002380000
> > [21474537.460000] 6 cmdlinepart partitions found on MTD device neo1973-nand
> > [21474537.465000] Creating 6 MTD partitions on "neo1973-nand":
> > [21474537.465000] 0x000000000000-0x000000040000 : "qi"
> > [21474537.470000] 0x000000040000-0x000000080000 : "depr-ub-env"
> > [21474537.480000] 0x000000080000-0x000000880000 : "kernel"
> > [21474537.485000] 0x000000880000-0x000000920000 : "depr"
> > [21474537.495000] 0x000000920000-0x000000960000 : "identity-ext2"
> > [21474537.500000] 0x000000960000-0x000010000000 : "rootfs"
> > [21474537.510000] initialised ok
> > [21474537.520000] usbcore: registered new interface driver libusual
> > [21474537.535000] s3c2440-usbgadget s3c2440-usbgadget: S3C2440:
> > increasing FIFO to 128 bytes
> > [21474537.535000] gta02_udc_command S3C2410_UDC_P_DISABLE
> > [21474537.540000] mice: PS/2 mouse device common for all mice
> > [21474537.555000] i2c /dev entries driver
> > [21474537.565000] s3c2440-i2c s3c2440-i2c: slave address 0x10
> > [21474537.565000] s3c2440-i2c s3c2440-i2c: bus frequency set to 97 KHz
> > [21474537.590000] pcf50633 0-0073: Probed device version 19 variant 132
> > [21474537.645000] input: PCF50633 PMU events as /class/input/input0
> > [21474537.690000] pcf50633-rtc pcf50633-rtc: rtc core: registered
> > pcf50633-rtc as rtc0
> > [21474537.710000] regulator: auto: 3300 mV normal
> > [21474537.715000] regulator: down1: 1300 <--> 1600 mV normal
> > [21474537.730000] regulator: down2: 1800 mV normal
> > [21474537.745000] regulator: ldo1: 3300 mV normal
> > [21474537.760000] regulator: ldo2: 3300 mV normal
> > [21474537.775000] regulator: ldo3: 3000 mV normal
> > [21474537.790000] regulator: ldo4: 3200 mV normal
> > [21474537.790000] neo1973-pm-bt neo1973-pm-bt.0: FIC Neo1973 Bluetooth
> > Power Management: starting
> > [21474537.800000] neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio
> > 1 [21474537.845000] regulator: ldo5: 3000 mV normal
> > [21474537.845000] neo1973-pm-gps neo1973-pm-gps.0: starting
> > [21474537.870000] regulator: ldo6: 3000 mV normal
> > [21474537.875000] regulator: hcldo: 2000 <--> 3300 mV normal
> > [21474537.885000] Detected S-Media IRQ# pullup, enabling interrupt
> > [21474537.885000] glamo3362 glamo3362.0: Glamo interrupt registered
> > [21474537.925000] glamo3362 glamo3362.0: Glamo core PLL1: 49119232Hz,
> > PLL2: 89980928Hz
> > [21474537.935000] SMEDIA Glamo frame buffer driver (C) 2007 Openmoko, Inc.
> > [21474538.080000] Console: switching to colour frame buffer device 80x58
> > [21474538.150000] fb0: SMedia Glamo frame buffer device
> > [21474538.495000] Generic Backlight Driver Initialized.
> > [21474538.495000] glamo-mci glamo-mci.0: glamo_mci driver (C)2007 Openmoko,
> > Inc [21474538.495000] glamo-mci glamo-mci.0: probe: mapped
> > mci_base:c889a400 irq:0. [21474538.500000] glamo-mci glamo-mci.0:
> > glamo_mci_set_ios: power down. [21474538.500000] glamo-mci glamo-mci.0:
> > initialisation done. [21474538.505000] regulator: memldo: 1800 mV normal
> > [21474538.505000] wake enabled for irq 53
> > [21474538.510000] s3c2440-ts s3c2440-ts: Starting
> > [21474538.510000] s3c2440-ts s3c2440-ts: Created Group filter len:12
> > coords:2 close:10 thresh:6
> > [21474538.510000] s3c2440-ts s3c2440-ts: Created Median filter len:20
> > coords:2 dec_threshold:24
> > [21474538.510000] s3c2440-ts s3c2440-ts: Created Mean filter len:4 coords:2
> > [21474538.510000] s3c2440-ts s3c2440-ts: Created Linear filter coords:2
> > [21474538.510000] s3c2440-ts s3c2440-ts: 4 filter(s) initialized
> > [21474538.510000] s3c2440-ts s3c2440-ts: Successfully loaded
> > [21474538.515000] input: s3c2410 TouchScreen as /class/input/input1
> > [21474538.530000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz
> > div=255 (req: 0kHz). Bus width=0
> > [21474538.540000] SD power -> 3200mV
> > [21474538.540000] glamo-mci glamo-mci.0: powered (vdd = 20) clk:
> > 195kHz div=255 (req: 195kHz). Bus width=0
> > [21474538.540000] glamo-mci glamo-mci.0: powered (vdd = 20) clk:
> > 195kHz div=255 (req: 195kHz). Bus width=0
> > [21474538.540000] glamo-mci glamo-mci.0: powered (vdd = 20) clk:
> > 195kHz div=255 (req: 195kHz). Bus width=0
> > [21474538.545000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
> > [21474538.545000] glamo-mci glamo-mci.0: Error after cmd: 0x120
> > [21474538.545000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
> > [21474538.545000] glamo-mci glamo-mci.0: Error after cmd: 0x120
> > [21474538.555000] SD power -> 2700mV
> > [21474538.555000] glamo-mci glamo-mci.0: powered (vdd = 15) clk:
> > 195kHz div=255 (req: 195kHz). Bus width=0
> > [21474538.555000] glamo-mci glamo-mci.0: powered (vdd = 15) clk:
> > 195kHz div=255 (req: 195kHz). Bus width=0
> > [21474538.555000] glamo-mci glamo-mci.0: powered (vdd = 15) clk:
> > 195kHz div=255 (req: 195kHz). Bus width=0
> > [21474538.590000] neo1973-pm-host neo1973-pm-host.0: starting
> > [21474538.605000] input: lis302-1 (top) as /class/input/input2
> > [21474538.630000] lis302dl spi3.0: Found lis302-1 (top)
> > [21474538.635000] input: lis302-2 (bottom) as /class/input/input3
> > [21474538.660000] lis302dl spi3.1: Found lis302-2 (bottom)
> > [21474538.665000] input: Neo1973 Buttons as /class/input/input4
> > [21474538.710000] wake enabled for irq 48
> > [21474538.710000] neo1973-resume neo1973-resume.0: starting
> > [21474538.720000] s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
> > [21474538.745000] APM Battery Driver
> > [21474538.770000] not changing prescaler of PWM 3, since it's shared
> > with timer4 (clock tick)
> > [21474538.770000] bq27000-battery bq27000-battery.0: BQ27000 Battery
> > Driver (C) 2008 Openmoko, Inc
> > [21474538.775000] cpuidle: using governor ladder
> > [21474538.785000] Registered led device: neo1973:vibrator
> > [21474538.790000] Registered led device: gta02-power:orange
> > [21474538.790000] Registered led device: gta02-power:blue
> > [21474538.795000] Registered led device: gta02-aux:red
> > [21474538.850000] usbcore: registered new interface driver usbhid
> > [21474538.855000] usbhid: v2.6:USB HID core driver
> > [21474538.860000] logger: created 64K log 'log_main'
> > [21474538.860000] logger: created 256K log 'log_events'
> > [21474538.865000] logger: created 64K log 'log_radio'
> > [21474538.885000] TCP cubic registered
> > [21474538.885000] NET: Registered protocol family 17
> > [21474538.890000] Bridge firewalling registered
> > [21474538.920000] pcf50633-rtc pcf50633-rtc: setting system clock to
> > 2009-11-01 15:32:48 UTC (1257089568)
> > [21474539.115000] glamo-mci glamo-mci.0: powered (vdd = 15) clk:
> > 195kHz div=255 (req: 195kHz). Bus width=0
> > [21474539.240000] Waiting 1sec before mounting root device...
> > [21474539.265000] glamo-mci glamo-mci.0: powered (vdd = 15) clk:
> > 195kHz div=255 (req: 195kHz). Bus width=0
> > [21474539.265000] glamo-mci glamo-mci.0: powered (vdd = 15) clk:
> > 16666kHz div=2 (req: 16666kHz). Bus width=0
> > [21474539.265000] glamo-mci glamo-mci.0: powered (vdd = 15) clk:
> > 16666kHz div=2 (req: 16666kHz). Bus width=2
> > [21474539.265000] mmc0: new high speed SDHC card at address 5bcf
> > [21474539.270000] mmcblk0: mmc0:5bcf SD16G 2.93 GiB
> > [21474539.270000]  mmcblk0: p2 p3 p4
> > [21474540.275000] VFS: Mounted root (ext2 filesystem) readonly on device
> > 179:2. [21474540.275000] Freeing init memory: 132K
> > [21474541.890000] pcf50633 0-0073: usb curlim to 100 mA
> > [21474542.380000] EXT2-fs warning: mounting unchecked fs, running
> > e2fsck is recommended
> > [21474547.075000] udevd version 124 started
> > [21474567.300000] EXT2-fs warning: mounting unchecked fs, running
> > e2fsck is recommended
> > [21474568.760000] usb0: MAC 00:1f:11:01:1c:a4
> > [21474568.760000] usb0: HOST MAC 00:1f:11:01:1c:a5
> > [21474568.760000] g_ether gadget: Ethernet Gadget, version: Memorial Day
> > 2008 [21474568.760000] g_ether gadget: g_ether ready
> > [21474568.810000] gta02_udc_command S3C2410_UDC_P_ENABLE
> > [21474569.615000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)
> > [21474570.315000] Bluetooth: Core ver 2.14
> > [21474570.315000] NET: Registered protocol family 31
> > [21474570.315000] Bluetooth: HCI device and connection manager initialized
> > [21474570.315000] Bluetooth: HCI socket layer initialized
> > [21474570.835000] Bluetooth: L2CAP ver 2.11
> > [21474570.835000] Bluetooth: L2CAP socket layer initialized
> > [21474571.135000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> > [21474572.060000] NET: Registered protocol family 10
> > [21474572.250000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> > [21474572.250000] s3c-ohci s3c-ohci: S3C24XX OHCI
> > [21474572.270000] s3c-ohci s3c-ohci: new USB bus registered, assigned
> > bus number 1
> > [21474572.270000] s3c-ohci s3c-ohci: irq 42, io mem 0x49000000
> > [21474572.375000] usb usb1: New USB device found, idVendor=1d6b,
> > idProduct=0001 [21474572.375000] usb usb1: New USB device strings: Mfr=3,
> > Product=2, SerialNumber=1
> > [21474572.375000] usb usb1: Product: S3C24XX OHCI
> > [21474572.375000] usb usb1: Manufacturer: Linux 2.6.29-rc3 ohci_hcd
> > [21474572.375000] usb usb1: SerialNumber: s3c24xx
> > [21474572.395000] usb usb1: configuration #1 chosen from 1 choice
> > [21474572.395000] hub 1-0:1.0: USB hub found
> > [21474572.395000] hub 1-0:1.0: 2 ports detected
> > [21474572.635000] pcf50633 0-0073: usb curlim to 500 mA
> > [21474572.780000] usb 1-1: new full speed USB device using s3c-ohci
> > and address 2
> > [21474573.025000] usb 1-1: New USB device found, idVendor=0a12,
> > idProduct=0001 [21474573.025000] usb 1-1: New USB device strings: Mfr=0,
> > Product=0, SerialNumber=0
> > [21474573.025000] usb 1-1: configuration #1 chosen from 1 choice
> > [21474573.470000] PPP generic driver version 2.4.2
> > [21474573.950000] Bluetooth: RFCOMM socket layer initialized
> > [21474573.950000] Bluetooth: RFCOMM TTY layer initialized
> > [21474573.950000] Bluetooth: RFCOMM ver 1.10
> > [21474574.060000] Bluetooth: Generic Bluetooth USB driver ver 0.4
> > [21474574.060000] usbcore: registered new interface driver btusb
> > [21474574.445000] s3c2440-sdi s3c2440-sdi: host detect has no irq available
> > [21474574.445000] mapped channel 0 to 0
> > [21474574.665000] s3c2440-sdi s3c2440-sdi: powered down.
> > [21474574.665000] s3c2440-sdi s3c2440-sdi: initialisation done.
> > [21474574.685000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested:
> > 0kHz). [21474574.685000] s3c2440-sdi s3c2440-sdi: running at 196kHz
> > (requested: 195kHz).
> > [21474574.685000] s3c2440-sdi s3c2440-sdi: running at 196kHz
> > (requested: 195kHz).
> > [21474574.695000] s3c2440-sdi s3c2440-sdi: running at 196kHz
> > (requested: 195kHz).
> > [21474574.695000] s3c2440-sdi s3c2440-sdi: running at 196kHz
> > (requested: 195kHz).
> > [21474574.715000] s3c2440-sdi s3c2440-sdi: running at 196kHz
> > (requested: 195kHz).
> > [21474574.725000] mmc1: queuing CIS tuple 0x01 length 3
> > [21474574.745000] mmc1: queuing CIS tuple 0x1a length 5
> > [21474574.755000] mmc1: queuing CIS tuple 0x1b length 8
> > [21474574.755000] s3c2440-sdi s3c2440-sdi: running at 25000kHz
> > (requested: 25000kHz).
> > [21474574.755000] s3c2440-sdi s3c2440-sdi: running at 25000kHz
> > (requested: 25000kHz).
> > [21474574.760000] mmc1: queuing CIS tuple 0x80 length 1
> > [21474574.760000] mmc1: queuing CIS tuple 0x81 length 1
> > [21474574.760000] mmc1: queuing CIS tuple 0x82 length 1
> > [21474574.765000] mmc1: new SDIO card at address 0001
> > [21474575.010000] No device for DAI s3c24xx-i2s
> > [21474575.220000] No device for DAI Bluetooth
> > [21474575.260000] asoc: WM8753 HiFi <-> s3c24xx-i2s mapping ok
> > [21474575.285000] asoc: WM8753 Voice <-> Bluetooth mapping ok
> > [21474575.290000] sound/soc/soc-dapm.c:349 mixer name 'Playback Mixer
> > Voice Capture Switch' truncated to 31 characters.
> > [21474575.290000] sound/soc/soc-dapm.c:349 mixer name 'Playback Mixer
> > Left Capture Switch' truncated to 31 characters.
> > [21474575.290000] sound/soc/soc-dapm.c:349 mixer name 'Playback Mixer
> > Right Capture Switch' truncated to 31 characters.
> > [21474575.290000] sound/soc/soc-dapm.c:349 mixer name 'Mono Mixer
> > Right Playback Switch' truncated to 31 characters.
> > [21474575.290000] sound/soc/soc-dapm.c:349 mixer name 'Mono Mixer
> > Voice Playback Switch' truncated to 31 characters.
> > [21474575.290000] sound/soc/soc-dapm.c:349 mixer name 'Mono Mixer
> > Sidetone Playback Switch' truncated to 31 characters.
> > [21474575.290000] sound/soc/soc-dapm.c:349 mixer name 'Mono Mixer
> > Bypass Playback Switch' truncated to 31 characters.
> > [21474575.290000] sound/soc/soc-dapm.c:349 mixer name 'Right Mixer
> > Voice Playback Switch' truncated to 31 characters.
> > [21474575.290000] sound/soc/soc-dapm.c:349 mixer name 'Right Mixer
> > Sidetone Playback Switch' truncated to 31 characters.
> > [21474575.290000] sound/soc/soc-dapm.c:349 mixer name 'Right Mixer
> > Right Playback Switch' truncated to 31 characters.
> > [21474575.290000] sound/soc/soc-dapm.c:349 mixer name 'Right Mixer
> > Bypass Playback Switch' truncated to 31 characters.
> > [21474575.290000] sound/soc/soc-dapm.c:349 mixer name 'Left Mixer
> > Voice Playback Switch' truncated to 31 characters.
> > [21474575.290000] sound/soc/soc-dapm.c:349 mixer name 'Left Mixer
> > Sidetone Playback Switch' truncated to 31 characters.
> > [21474575.290000] sound/soc/soc-dapm.c:349 mixer name 'Left Mixer
> > Bypass Playback Switch' truncated to 31 characters.
> > [21474575.855000] HIFInit
> > [21474576.125000] Unable to find swap-space signature
> > [21474576.885000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1)
> > [21474576.890000] eth0 (sdio_ar6000): not using net_device_ops yet
> > [21474576.960000] AR6000 Reg Code = 0x40000060
> > [21474588.780000] eth0: no IPv6 routers present
> > [21474589.260000] usb0: no IPv6 routers present
> > [21474595.760000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> > [21474595.760000] Bluetooth: BNEP filters: protocol multicast
> > [21474597.065000] Bluetooth: SCO (Voice Link) ver 0.6
> > [21474597.065000] Bluetooth: SCO socket layer initialized
> > [21474604.345000] mapped channel 10 to 2
> > [   37.550000] rxerr: port=1 ch=0x00, rxs=0x0000000d
> > [   37.585000] rxerr: port=1 ch=0x00, rxs=0x0000000c
> > [   42.405000] modem wakeup interrupt
> > [   43.985000] modem wakeup interrupt
> > [   47.055000] rxerr: port=0 ch=0x00, rxs=0x0000000c
> > [   47.055000] rxerr: port=0 ch=0x00, rxs=0x0000000c
> > [ 3148.630000] Adding 803240k swap on /dev/mmcblk0p4.  Priority:-1
> > extents:1 across:803240k SS
> > [ 3189.750000] rxerr: port=1 ch=0x0f, rxs=0x00000001
> > [ 3237.070000] Adding 803240k swap on /dev/mmcblk0p4.  Priority:-1
> > extents:1 across:803240k SS
> >
> > _______________________________________________
> > support mailing list
> > support at lists.openmoko.org
> > https://lists.openmoko.org/mailman/listinfo/support
> >
> >   
> 
> 
> -- 
> Mit freundlichen Grüssen
> Matthias Huber 
> Kohlstattstr. 14
> 86459 Wollishausen
> Tel: 08238-7998
> LPI000181125
> 
> 


-- 
------------- Codito, ergo sum - "I code, therefore I am" --------------
The Rasterman (Carsten Haitzler)    raster at rasterman.com