need sugestions

[Iurii]

Robin Paulson wrote:
> 
> 2009/11/23 Iurii <yuri at reverseenterprises.com>:
>> i tried the suggestions of wiki but... i forced problems with it and i
>> still
>> cant connect it that's why i asked here(
> 
> i use this bash script to connect. it probably has errors and bad
> practice contained within, but it works for me:
> 
> sudo iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24
> sudo sysctl -w net.ipv4.ip_forward=1
> sudo ifconfig eth2 up
> ssh root at 192.168.0.202
> 
> there are other methods. some of them may be better
> 
> eth2 may be your neo connection, it might not be. it depends upon the
> network cards in your computer
> 
> try running ifconfig to find out which connection the neo is given
> 
> _______________________________________________
> support mailing list
> support at lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/support
> 
> 

eth0      Link encap:Ethernet  HWaddr 00:14:2a:a9:4d:fb  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:39863 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4764 errors:0 dropped:1 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:5180502 (4.9 MB)  TX bytes:622521 (607.9 KB)
          Interrupt:16 Base address:0xe400 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1778 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1778 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:146052 (142.6 KB)  TX bytes:146052 (142.6 KB)

usb0      Link encap:Ethernet  HWaddr d2:d8:e1:48:cd:a2  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:125 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:18376 (17.9 KB)

this is my ifconfig
can you try to explain me what should i do now ? 
the freeruneer is connected as usb0 i think sow

-- 
View this message in context: http://n2.nabble.com/need-sugestions-tp4036447p4050179.html
Sent from the Openmoko Support mailing list archive at Nabble.com.