no wifi on freerunner fso

[Joachim Ott]

This is how it's looking over here with a working wifi. You still
haven't told, if the wlan driver is builtin or a module.

[21474742.365000] s3c2440-sdi s3c2440-sdi: powered down.
[21474742.365000] s3c2440-sdi s3c2440-sdi: powered down.
[21474805.675000] s3c2440-sdi s3c2440-sdi: host detect has no irq available
[21474805.755000] s3c2440-sdi s3c2440-sdi: powered down.
[21474805.755000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
[21474805.775000] s3c2440-sdi s3c2440-sdi: running at 196kHz
(requested: 195kHz).
[21474805.785000] s3c2440-sdi s3c2440-sdi: initialisation done.
[21474805.815000] s3c2440-sdi s3c2440-sdi: running at 196kHz
(requested: 195kHz).
[21474805.825000] s3c2440-sdi s3c2440-sdi: running at 196kHz
(requested: 195kHz).
[21474805.840000] s3c2440-sdi s3c2440-sdi: running at 196kHz
(requested: 195kHz).
[21474805.855000] s3c2440-sdi s3c2440-sdi: running at 196kHz
(requested: 195kHz).
[21474805.885000] mmc1: queuing CIS tuple 0x01 length 3
[21474805.910000] mmc1: queuing CIS tuple 0x1a length 5
[21474805.960000] mmc1: queuing CIS tuple 0x1b length 8
[21474805.960000] s3c2440-sdi s3c2440-sdi: running at 25000kHz
(requested: 25000kHz).
[21474805.975000] s3c2440-sdi s3c2440-sdi: running at 25000kHz
(requested: 25000kHz).
[21474805.985000] mmc1: queuing CIS tuple 0x80 length 1
[21474805.985000] mmc1: queuing CIS tuple 0x81 length 1
[21474806.005000] mmc1: queuing CIS tuple 0x82 length 1
[21474806.005000] mmc1: new SDIO card at address 0001
[21474807.115000] eth0 (sdio_ar6000): not using net_device_ops yet
[21474807.190000] AR6000 Reg Code = 0x40000060
[21474817.630000] eth0: no IPv6 routers present
[   34.790000] AR6000 disconnected
[   34.850000] AR6000 connected event on freq 2452 with bssid
00:1c:4a:d1:5a:af  listenInterval=100, beaconInterval = 100,
beaconIeLen = 26 assocReqLen=57 assocRespLen =22
[ 4578.285000] AR6000 disconnected from 00:1c:4a:d1:5a:af