Login screen on firmware upgradation
dima_nadya at 013net.net
Sun Mar 20 22:09:32 CET 2011
Just a minor HTH note from me - a new (and seems that happy) user of
Power up -- even if the battery is on 0%, I keep the precise order:
first press and hold AUX, then without releasing AUX connect USB cable,
and power on. It appeared somewhere on Wiki.
On Sat, 2011-03-19 at 09:17 +0100, Dr. H. Nikolaus Schaller wrote:
> Hi Rijul,
> please check that your downloaded image is not corrupted.
> You can download and compare it with our copy which we
> have used successfully an uncounted number of times:
> You must also flash the image on the flat memory card
> (e.g. /dev/sdb) and not into a partition (and not /dev/sdb1
> or /dev/sdb2).
> To boot from NOR flash, press the AUX button and
> then power on. The boot menu should appear within
> a second. Choose "boot from SD (ext)".
More information about the support