<div dir="ltr">Hello,<br><br>I don't seem to be able to ssh into the FreeRunner. I did
not get the Neo1973 so this is my first experience with this phone. Also, I am using Ubuntu as the GNU/Linux host.<br><br>[Note: I was able
to ssh in with my Windows Vista machine (following the instructions on the wiki).
However, I would like to get Ubuntu working, since I use it as my main
computer.]<br>
<br>I run this line: <br>
<font size="1"> ifconfig usb0 <a href="http://192.168.0.200/" target="_blank">192.168.0.200</a> netmask <a href="http://255.255.255.0/" target="_blank">255.255.255.0</a></font><br><br>After, I run <font size="1">ifconfig</font> and see:<br>
<br><font size="1">desktop:~$ ifconfig<br>eth0 Link encap:Ethernet HWaddr 00:11:2f:08:16:c0 <br>
inet addr:<a href="http://192.168.1.103/" target="_blank">192.168.1.103</a> Bcast:<a href="http://192.168.1.255/" target="_blank">192.168.1.255</a> Mask:<a href="http://255.255.255.0/" target="_blank">255.255.255.0</a><br>
inet6 addr: fe80::211:2fff:fe08:16c0/64 Scope:Link<br>
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1<br> RX packets:684 errors:0 dropped:0 overruns:0 frame:0<br> TX packets:119 errors:0 dropped:0 overruns:0 carrier:0<br> collisions:0 txqueuelen:1000 <br>
RX bytes:105645 (103.1 KB) TX bytes:39554 (38.6 KB)<br> Interrupt:16 <br><br>lo Link encap:Local Loopback <br> inet addr:<a href="http://127.0.0.1/" target="_blank">127.0.0.1</a> Mask:<a href="http://255.0.0.0/" target="_blank">255.0.0.0</a><br>
inet6 addr: ::1/128 Scope:Host<br> UP LOOPBACK RUNNING MTU:16436 Metric:1<br> RX packets:16 errors:0 dropped:0 overruns:0 frame:0<br> TX packets:16 errors:0 dropped:0 overruns:0 carrier:0<br>
collisions:0 txqueuelen:0 <br> RX bytes:1008 (1008.0 B) TX bytes:1008 (1008.0 B)<br><br>usb0 Link encap:Ethernet HWaddr de:d7:63:45:48:6b <br> inet addr:<a href="http://192.168.0.200/" target="_blank">192.168.0.200</a> Bcast:<a href="http://192.168.0.255/" target="_blank">192.168.0.255</a> Mask:<a href="http://255.255.255.0/" target="_blank">255.255.255.0</a><br>
inet6 addr: fe80::dcd7:63ff:fe45:486b/64 Scope:Link<br> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1<br> RX packets:0 errors:0 dropped:0 overruns:0 frame:0<br> TX packets:6 errors:0 dropped:0 overruns:0 carrier:0<br>
collisions:0 txqueuelen:1000 <br> RX bytes:0 (0.0 B) TX bytes:468 (468.0 B)</font><br><br><br><br>Which seems to me, like it should be correct.<br>However, when I run <font size="1">ssh <a href="mailto:root@192.168.0.202" target="_blank">root@192.168.0.202</a></font> it times out.<br>
<br>I can ping <a href="http://192.168.0.200/" target="_blank">192.168.0.200</a> and get a response.<br>But if I ping <a href="http://192.168.0.202/" target="_blank">192.168.0.202</a>, I get and "Operation not permitted" error:<br>
<br><font size="1">desktop:~$ ping -I usb0 <a href="http://192.168.1.202/" target="_blank">192.168.1.202</a><br>
PING <a href="http://192.168.1.202/" target="_blank">192.168.1.202</a> (<a href="http://192.168.1.202/" target="_blank">192.168.1.202</a>) from <a href="http://192.168.1.103/" target="_blank">192.168.1.103</a> usb0: 56(84) bytes of data.<br>
ping: sendmsg: Operation not permitted<br>
ping: sendmsg: Operation not permitted<br>ping: sendmsg: Operation not permitted<br><br>--- <a href="http://192.168.1.202/" target="_blank">192.168.1.202</a> ping statistics ---<br>3 packets transmitted, 0 received, 100% packet loss, time 2008ms</font><br>
</div>