<div dir="ltr">Brian C <brianwc@...> writes:<br><br>> <br>> 2. partition2 is where I want to put Qtopia.<br>> After formatting it ext2 and mounting the partition, I did:<br>> wget <a href="http://qtopia.net/downloads/neo/qtopia-4.3.2-gta02-flash-07221045.tgz">http://qtopia.net/downloads/neo/qtopia-4.3.2-gta02-flash-07221045.tgz</a><br>
> tar zvxf qtopia-4.3.2-gta02-flash-07221045.tgz<br>> mv uImage*.bin uImage.bin<br>> <br>> I changed the kernel name based on something I read stating it had to be<br>> called uImage.bin (is that wrong?)<br>
> <br><br>You must follow the instructions on the wiki. You did not extract the rootfs.<br><br><br>> 4. I edited by NAND U-boot menu to include:<br>> setenv menu_9 Boot from microSD part2 (ext2+ext2): setenv bootargs<br>
> \${bootargs_base} rootfstype=ext2 root=/dev/mmcblk0p2 rootdelay=5<br>> \${mtdparts} ro\; mmcinit\; ext2load mmc 1 0x32000000<br>> \${sd_image_name}\; bootm 0x32000000<br><br>Your partitions numbers are wrong from what you have said. I added a warning to<br>
watch partition numbers and what to change.<br><br><br>> Thanks for any help. If I figure all this out, there is going to be a<br>> single crystal clear wiki page on this when I get done.<br><br>Please do _not_ try to make a "single crystal clear wiki page." Please fix<br>
relevant sections of the wiki, but do not try to concatenate all sections to one<br>page for what you, personally, are trying to do. This leads to multiple crummy<br>pages. <br><br><br><br></div>