<div dir="ltr">I received my FR this Tuesday. I've upgrade to 2008.09, and almost everything works. My biggest beef is that the SD card is not even detected by the system. Here is the relevant dmesg output:<br><br><span style="font-family: courier new,monospace;">[ 2.195000] SD power -> 3200mV</span><br style="font-family: courier new,monospace;">
<span style="font-family: courier new,monospace;">[ 2.235000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0</span><br style="font-family: courier new,monospace;"><span style="font-family: courier new,monospace;">[ 2.235000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0</span><br style="font-family: courier new,monospace;">
<span style="font-family: courier new,monospace;">[ 2.235000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0</span><br style="font-family: courier new,monospace;"><span style="font-family: courier new,monospace;">[ 2.240000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0</span><br style="font-family: courier new,monospace;">
<span style="font-family: courier new,monospace;">[ 2.240000] glamo-mci glamo-mci.0: Error after cmd: 0x120</span><br style="font-family: courier new,monospace;"><span style="font-family: courier new,monospace;">[ 2.240000] glamo-mci glamo-mci.0: Error after cmd: 0x8120</span><br style="font-family: courier new,monospace;">
<span style="font-family: courier new,monospace;">[ 2.245000] glamo-mci glamo-mci.0: Error after cmd: 0x120</span><br style="font-family: courier new,monospace;"><span style="font-family: courier new,monospace;">[ 2.245000] glamo-mci glamo-mci.0: Error after cmd: 0x8120</span><br style="font-family: courier new,monospace;">
<span style="font-family: courier new,monospace;">[ 2.245000] glamo-mci glamo-mci.0: Error after cmd: 0x120</span><br style="font-family: courier new,monospace;"><span style="font-family: courier new,monospace;">[ 2.250000] glamo-mci glamo-mci.0: Error after cmd: 0x8120</span><br style="font-family: courier new,monospace;">
<span style="font-family: courier new,monospace;">[ 2.250000] mmc_set_power(power_mode=0, vdd=0</span><br><br>In reading other mailing lists, the 6 "Error after cmd" are normal and just part of the startup. However, after that, glamo should detect my SD card.<br>
I am using the 512mb card that came with my phone. The card works in 2 other devices (one is a Samsung phone, the other is my PC).<br><br>here is cat /proc/cmdline :<br><span style="font-family: courier new,monospace;">rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200 console=tty0 loglevel=4 regular_boot mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs)</span><br>
<br>U-Boot is 1.3.2-moko12<br><br>I have an 8gb card on the way from Newegg, but it will be useless if I can't get the stock card to work. I've positioned and repositioned the card several times, it's never detected.<br>
<br>Thanks,<br>Luke<br></div>